Silver Dragon Portable Mini Cable V3
This is the Silver Dragon V3 Portable Mini Cable, or top of the line portable cable for the most accurate signal transfer for your portable audio needs. It is not as subtle/flexible as the Silver Dragon V1 IEM Portable Mini Cable. This cable is based on the same geometry on the award winning Silver Dragon V3 Headphone Cable.
When detail, clarity and definition are the most important aspect for your portable rig, this is the cable of choice. Perfect for music where instrument separation and the ability to pick out presentation aspects are important. The clean rich sound of our Silver Dragon cable line will produce audio nirvana. For Jazz, Blues, Folk and eclectic music this cable is a must.
A whole host of connector options are available. And if a custom option is required, please contact us for details.
Min length od 1.0ft when doing any dual connectors like Dual RCAs
The cable uses 4 x 99.99998% UP-OCC silver 24AWG Teflon insulated stranded conductors. We have improved the conductors properties over the previous Version 2 cable. These conductors are free from impurities and have virtually no crystal boundaries. The conductors have almost no distortion compared to ordinary silver conductors.
Each conductor is made up of a special varying sized stranded geometry. The silver stranding's are mixed with Kevlar standing's to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing of a portable system. The conductors are then surrounded by cotton and a thin layer of Teflon tape.
It is protected by a 100% coverage silver plated copper shield and placed in a polyethylene jacket for further protection. To improve it's flexibility we are no longer using a Techflex jacketing as we did with our previous versions.
A variety of connection options are available for your downstream connection such as the mini plug, RCA, XLR and many others. We custom build these in house to your connection specification. The cable can be used in either a single ended or balanced design. The wire is soldered to a connector using high quality Cardas silver solder.