FREE SHIPPING on US orders over $49 - or -
$20 off International Orders view details

Bricasti M15 Stereo Power Amplifier

$18,000.00
In stock

The Bricasti M15 stereo amplifier is the beating heart of any system and in particular, a Bricasti Design system. Like its bigger mono-block brother the M28, the M15 delivers heaps of power at critical stages, forging a sonic path of least resistance all the way from source to the speaker. This can be heard and felt and is in part thanks to its fully differential / balanced architecture.

Precise control

The power amplifier is a very critical part of the audio chain. It has to take the incoming signal and amplify it and most importantly, deal with the load of the loudspeaker and control its back EMF with precision. The sound of the M15 is intended to be transparent and revealing with low distortion, and fully dynamic with no sense of limits and compression in the reproduction, on any loudspeaker.

Balanced power

The M15 stereo power amplifier is a true reference design in analog power amplification, an uncompromising design offering extremely low distortion with moderate power and a unique truly balanced topology rarely seen in the industry. When combined with our M1 DAC or M12 Source Controller driving the M15 one can achieve a fully differential signal path, from the converter to the loudspeaker.

Modern application

The intention of the M15 is to integrate seamlessly into your existing system while allowing for a more compact form factor. A unique feature like trim control lets you properly gain stage the M15, critical with today's digital sources driving the amplifier directly. You also enjoy the same sonic benefits of the M28 monoblock with the stillpoints isolation designed directly into the feet.

Manuals and Guides
pdf
(Size: 183.6 KB)
Bricasti M15 Stereo Amplifier User Manual

Specifications

Total Harmonic Distortion
THD+N less than 0.005% 20hz-20kHz at full rated power into 8 and 4 ohms
Power
125W into 8 ohms, 250W into 4 ohms, 500W into 2 ohms
Frequency response
10hz-150kHz, within 0.5db
Signal to Noise
greater than 85db at full rated power
Power Topology
Fully Differential
Balanced Input
XLR connector 200k ohm impedance
Unbalanced Input
RCA connector 100k ohm impedance
Mains Voltage set at factory
100, 120, 220, 230, 240 VAC, 50 Hz - 60 Hz
Trigger In
TRS connector for 5V external trigger
Input Trim
0db, -6db, -12db,-18db of attenuation
Power consumption
60W standby, 2W idle
Warranty parts and labor
5 yrs limited

Physical

Finish
Anodized Aluminum
Dimensions
10.5" H x 17" W x 18" D
Weight
90 lbs
Shipping Weight
110 lbs

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Copyright © 2018 Moon Audio. All rights reserved.