The Black Dragon Premium cable is an excellent upgrade for your Rosson Audio Design RAD-0 headphones.
The premium Black Dragon includes premium connectors that look and sound amazing! It is extremely smooth sounding with great low end and wonderful voicing.
Your one-of-a-kind headphones deserve nothing but the best.
Most stock headphone cables are made of poor, ultra-thin conductors that work as a bottleneck for sound. Poor geometries, no shielding, rubber jackets, and a whole host of other issues in OEM cables can limit the performance of the headphone driver in terms of clarity and definition.
Dragon Cables are handcrafted from quality materials in Moon Audio's headquarters in Cary, North Carolina. All of our cables are created with ultra-pure, single-crystal silver and copper strands and engineered to provide the cleanest, most musical presentation. Our wire is void of impurities and crystalline boundaries, leaving nothing between you and your music.
Premium Dragon Cables offer the same quality construction as the standard line, featuring UP-OCC 99.99998% pure conductors and matching cable designs with a few upgrades. Cardas Silver Solder is replaced with Mundorf MSolder SUPREME Silver-Gold mix at every connection point, and premium Furutech Rhodium connectors are included to enhance the look, feel and listening pleasure of all your hifi music sessions. When you are trying to squeeze out every last percentage point of performance, the Premium version makes sense. The Furutech Top Line connectors are quite simply the best made, and every point of signal saturation makes a difference.
Is there a night and day difference between the sound quality of the standard and premium? No. Is the Premium the best of the best? Yes. These cables are meant for cream-of-the-crop headphones where every detail makes a difference in bringing you closer to audio bliss.
The Black Dragon is warm and smooth with a musical presentation. Copper strands enhance the body, shape, and immediacy of the music. The detail and expansiveness of the Black Dragon make it a flexible fit where a broad range of musical genres are played. It can also improve bass frequencies on bass-light headphones.
The smooth, musical quality makes it a perfect fit for headphones that tend to sound a bit edgy or bright. Despite its warmth, the Black Dragon does not have a laid back, lush sound. It is much closer to neutral, making it a very natural sounding cable.
For more information on finding your signature sound, visit our Sound Signature Guide.
The Black Dragon is designed to add warmth and richness to the bottom end without losing any clarity in the sound signature. The Black Dragon will smooth out the top end and provide a fuller presentation with more weight to the sound.
This cable features a 3.5mm connector. While the same connector is used on other headphones the wiring schematics are different, meaning the cables are not interchangeable. This cable is designed solely for use with Rosson Audio Design headphones.
This cable is warmer in nature than our Silver Dragon Premium Stellia V3 headphone cable. It is extremely smooth sounding with great low end and wonderful voicing. It is not a laid back lush or dark sounding cable. It smooths out the top end making it a little less analytical and a little more natural sounding. It also adds bottom end weight to the lower frequencies and provides a fuller sound and wider soundstage.
Each conductor is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives. The conductors are then surrounded by cotton and then a layer of Teflon tape. This V2 version is now also shielded and placed in a polyethylene jacket for further protection.
The wire is soldered to the connector with high-quality silver solder. The default 1/4" Plug is the new Furutech CF-763. Furutech’s beautifully finished, beautiful sounding CF-763 connectors are the result of meticulous engineering and careful audition of various suitable materials. The CF-763 features a Nonmagnetic Rhodium-plated α (Alpha) phosphor bronze conductor and Fluoropolymer insulation for minimal impedance and a nonmagnetic stainless and carbon fiber finished housing for superior damping.
For XLR connections there are 2 choices. The FP-601M（R) XLR which uses a Beryllium copper and phosphor bronze α (Alpha) Conductor: the body is a Copper alloy with PVDF Fluoropolymer insulation. The second choice is the top of the line CF-601M(R) XLR which utilizes an α (Alpha) Beryllium copper and phosphor bronze Rhodium-plated Conductor with Carbon fiber and nonmagnetic stainless steel housing. The Body is PVDF Fluoropolymer insulation with a Specially designed cable strain relief.
Dragon Cables are an easy do-it-yourself upgrade to your favorite headphones with detachable cables. With a wide array of connection options, a plug-and-play cable is just a few clicks away.
We also offer custom headphone hacks for your hard-wired cans, like many Grado, Sennheiser or AKG headphones. For more information on custom headphone modifications, visit our Hack Your Headphones portal.
Dragon Audio Cables are covered by a one-year limited warranty against material or manufacturing defects. For more information, visit our Warranty Terms page.
*While this is a standard connector, the wiring is not consistent with many headphone cables that use this connection. For example, this cable is not interchangeable with cables for Focal headphones.