Silver Dragon and Sennheiser HD800
The Sennheiser HD800 headphone has a more detailed and resolute sound signature. We recommend the Black Dragon headphone cable as the best match, but listeners looking for a very detailed, more forward-sounding headphone may prefer the Silver Dragon.
Sennheiser headphones primarily use one of four headphone connectors. This premium cable is available in your choice of the standard 3.5mm connector or the screw-type 3.5mm connector.
The Silver Dragon Headphone Cable Version 3 (V3) is our top-of-the-line headphone cable. It is a silver conductor based cable and it uses 4 x 99.99998% UP-OCC Stranded Silver 24AWG Teflon insulated stranded conductors.
This Premium cable is excellent for the Focal Stellia headphones and includes premium connectors to enhance the look, feel and listening pleasure of all your hifi music sessions. Higher grade Silver Solder is used and all connectors are treated.
"The air and separation of the musicians and instruments were more noticeable. Vocals became crisper and the transparency increased...I forgot about the cables and just enjoyed the music."
— Frank Iacone, Positive Feedback | Issue 73, May/June 2014
Moon Audio has improved the conductor properties on the Silver Dragon Headphone Cable V3 over the previous Version 2 as these conductors are free from impurities and have virtually no crystal boundaries. The conductors have almost no distortion compared to ordinary silver conductors. The previous version used 4 x 99.998% Ultra Pure Silver 24AWG Teflon insulated stranded conductors. Therefore, we have stepped up the purity to the purist available by today's technology. The Silver Dragon Headphone Cable Version 3 (V3) uses 4 x 99.99998% UP-OCC Stranded Silver 24AWG Teflon insulated stranded conductors.
Each conductor is made up of a special varying sized stranded geometry. The silver strandings are mixed with Kevlar standing's to reinforce the conductor making it stronger overall and less prone to failure due to the harsh constant flexing that headphone cable experience.
Each conductor is encapsulated in a Teflon casing. The conductors are then surrounded by cotton and a thin layer of Aluminum Foil.
It is then protected by a 100% coverage silver plated copper secondary shield and placed in a polyethylene jacket for further protection. To improve its flexibility, we are no longer using a Techflex jacketing as we did with our previous versions.
The wire is soldered to the connector with high-quality silver solder. The default 1/4" Plug is the new Furutech CF-763. Furutech’s beautifully finished, beautiful sounding CF-763 connectors are the result of meticulous engineering and careful audition of various suitable materials. The CF-763 features a Nonmagnetic Rhodium-plated α (Alpha) phosphor bronze conductor and Fluoropolymer insulation for minimal impedance and a nonmagnetic stainless and carbon fiber finished housing for superior damping.
For XLR connections there are 2 choices. The FP-601M（R) XLR which uses a Beryllium copper and phosphor bronze α (Alpha) Conductor: the body is a Copper alloy with PVDF Fluoropolymer insulation. The second choice is the top of the line CF-601M（R）XLR which utilizes an α (Alpha) Beryllium copper and phosphor bronze Rhodium-plated Conductor with Carbon fiber and nonmagnetic stainless steel housing. The Body is PVDF Fluoropolymer insulation with a Specially designed cable strain relief.