The Black Dragon Premium Cable is a wonderful upgrade for your RAAL SR1a headphones. UP-OCC copper strands in the Black Dragon warm the bass and midrange, making them a great match for the more analytical sound of the SR1a. You get more bottom-end weight, a more musical midrange, and a smoothed-out top end that doesn't lose anything in the way of detail. If your goal is an engaging and immersive sound that gives you that "I'm there" feeling, you'll want to pair your SR1a headphones with a Black Dragon. This versatile cable works well with most genres, particularly Rock and Roll, Pop, R&B, Electronica, and other music where a big, bold presentation is desired.
The Black Dragon Premium Cable features 4 x 21.5AWG Teflon-insulated stranded conductors using pure single crystallized UP-OCC pure copper with 7N purity 99.99998%. Dragon Premium cables offer the same quality construction as our standard Dragon cables, but with extras like Mundorf Msolder SUPREME SilverGold and premium rhodium-plated Furutech connectors that look and feel great while enhancing your listening pleasure. Get ready for a truly immersive experience that will make you fall in love with your RAAL SR1a headphones all over again!Compatible with the RAAL SR1a headphone.
The electrostatic design of this headphone limits the connector options to one configuration:
Amplifier: Furutech Rhodium FP-706F female 4-pin XLR
Headphone: Dual 3.5mm headphone connectors
Most stock headphone cables are made of poor, ultra-thin conductors that work as a bottleneck for sound. Poor geometries, no shielding, rubber jackets, and a whole host of other issues in OEM cables can limit the performance of the headphone driver in terms of clarity and definition.
Dragon Cables are handcrafted from quality materials in Moon Audio's headquarters in Cary, North Carolina. All of our cables are created with ultra-pure, single-crystal silver and copper strands and engineered to provide the cleanest, most musical presentation. Our wire is void of impurities and crystalline boundaries, leaving nothing between you and your music.
Premium Dragon Cables offer the same quality construction as the standard line, featuring UP-OCC 99.99998% pure conductors and matching cable designs with a few upgrades. Cardas Silver Solder is replaced with Mundorf MSolder SUPREME Silver-Gold mix at every connection point, and premium Furutech Rhodium connectors are included to enhance the look, feel and listening pleasure of all your hifi music sessions. When you are trying to squeeze out every last percentage point of performance, the Premium version makes sense. The Furutech Top Line connectors are quite simply the best made, and every point of signal saturation makes a difference.
Is there a night and day difference between the sound quality of the standard and premium? No. Is the Premium the best of the best? Yes. These cables are meant for cream-of-the-crop headphones where every detail makes a difference in bringing you closer to audio bliss.
The Black Dragon is warm and smooth with a musical presentation. Copper strands enhance the body, shape, and immediacy of the music. The detail and expansiveness of the Black Dragon make it a flexible fit where a broad range of musical genres are played. It can also improve bass frequencies on bass-light headphones.
The smooth, musical quality makes it a perfect fit for headphones that tend to sound a bit edgy or bright. Despite its warmth, the Black Dragon does not have a laid back, lush sound. It is much closer to neutral, making it a very natural sounding cable.
For more information on finding your signature sound, visit our Sound Signature Guide.
This cable features a 3.5mm connector on the headphone side to fit the RAAL SR1a Earfield Monitors. While the same connector is used on other headphones the wiring schematics are different, meaning the cables are not interchangeable. The SR1a uses an unusual circuit design, and this cable can only be used for these headphones. It is also only available with a female XLR amplifier connector.
Each black dragon conductor is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives. The conductors are then surrounded by cotton and then a layer of Teflon tape. This V2 version is now also shielded and placed in a polyethylene jacket for further protection.
The wire is soldered to the connector with high-quality silver solder. The default 1/4" Plug is the new Furutech CF-763. Furutech’s beautifully finished, beautiful sounding CF-763 connectors are the result of meticulous engineering and careful audition of various suitable materials. The CF-763 features a nonmagnetic rhodium-plated α (Alpha) phosphor bronze conductor and fluoropolymer insulation for minimal impedance and a nonmagnetic stainless and carbon fiber finished housing for superior damping.
For XLR connections there are two choices. The FP-601M(R) XLR uses a beryllium copper and phosphor bronze α (Alpha) conductor; the body is a copper alloy with PVDF fluoropolymer insulation. The second choice is the top-of-the-line CF-601M(R) XLR, which utilizes an α (Alpha) beryllium copper and phosphor bronze rhodium-plated Conductor with Carbon fiber and nonmagnetic stainless steel housing. The body is PVDF fluoropolymer insulation with a specially designed cable strain relief.
Dragon Cables are an easy do-it-yourself upgrade to your favorite headphones with detachable cables. With a wide array of connection options, a plug-and-play cable is just a few clicks away.
We also offer custom headphone hacks for your hard-wired cans, like many Grado, Sennheiser or AKG headphones. For more information on custom headphone modifications, visit our Hack Your Headphones portal.
Dragon Audio Cables are covered by a one-year limited warranty against material or manufacturing defects. For more information, visit our Warranty Terms page.