Black Dragon Mini Coax Digital Cable For Chord Hugo 2 to Hugo M Scaler

$180.00
In stock

This is a special version of the The Black Dragon 75 Ohm Mini Coax Digital Cable for the Chord Hugo 2 to Hugo M Scaler.

This cable is extremely flexible which makes it a perfect match for portable audio digital transmission applications like the Hugo 2. It utilizes a 3.5mm male mini plug configured for Dual Data output transmission to the Hugo M Scaler.

The Hugo M Scaler will allow you to upscale standard 44.1kHz digital audio up to 705.6kHz (16x CD’s 44.1kHz native resolution), ready to be passed to a suitable DAC; Hugo M Scaler extends its upscaling performance to 768kHz (from 96kHz input data) for our dual-BNC-input DACs: DAVE, Qutest and the new Hugo TT 2.

The Black Dragon is the best way to integrate these products.

Now available for the Chord Hugo 2 and Chord Hugo M Scaler.

The Black Dragon uses a miniature 75 ohm cable geometry based on RG179 specifications.

It uses a silver-plated copper 7 strand conductor, and a 100% coverage silver-plated copper shield. Both are 99.99% silver over 99.999% oxygen free slow drawn copper.

The wire is soldered to the connectors with Cardas silver solder and it is then covered in 1 layer of Techflex braid to protect the geometry integrity of the cable. 

We do recommend a 40 hour break-in time for the cable to truly realize the optimum sound.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 5 answers
Will Using the black dragon mini coax with chords m scaler and the Hugo 2 I’ve me the full 768 Herz upscaling capability? If not, what results will I get?
Jeffrey on Sep 12, 2019
BEST ANSWER: It will give You the full upscaling. This is an absolute top class cable with very good shielding from RF. It solved my previous problem with drop outs and RF interference. The Furutech connectors make a very tight and solid connection with the HMS. I can recommend it highly
When connecting the Chord Hugo 2 DAC to the Chord M Scaler using the Black Dragon mini coax cable...Should that connection be from the M Scaler into the Hugo 2? I am using the Roon Nucleus as my streaming device. So to me the proper setup should be: Roon Nucleus to the M Scaler via USB. M Scaler to Hugo 2 via Black Dragon mini coax cable. Is this correct?
Additionally, what type of mini 3.5 mm connection is incorporated into the Black Dragon cable? Thank you for any response!
Jeffrey on Oct 1, 2019
BEST ANSWER: Thank you for our question. Yes, that is the correct signal chain. We use this exact setup in the office.

For this cable, we use the Rhodium Oyaide straight 3.5mm TRS and Rhodium Furutech BNC's.

Portable Headphone Amplifiers / DACs Top Picks by Moon Audio