Focal Shape 50 Monitor Speaker

Was: $799.00
Now: $719.00
In Stock
Add to Wish List

The Focal Shape 50 is the versatile monitoring loudspeaker par excellence.

This speaker can be used from 30" away (80cm).

Price for one speaker. Need to order 2 for a stereo pair.

Recommended room sizes of 130 Sqft.

The Focal Shape 50 can be used from 30" away (80cm). It has very extended low end frequency response (50Hz) considering its compact design. This design and other settings makes this monitor ideal for rooms measuring less than 130ft2 (12m2).

Each Shape 50 monitor speaker is made in France and use five innovations to maximize acoustic transparency. These were designed to meet the needs of near-field monitoring. Shape monitors combine an ingenuous design and numerous settings optimized for the acoustics of small listening rooms.

The innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image.

The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalization of these essential registers much easier.

The new tweeter is what's at the source of the very high definition. It efficiently reveals any hissing, and it's also very precise in the very high end.

Flax Sandwich Cone

Recent technology has proven to be a considerable improvement, in terms of weight, rigidity and damping.

TMD Surround

This technology provides a linear frequency response curve between 1 and 2kHz, while significantly reducing distortion in the same range. The mid-range register benefits from remarkable neutrality, and it contributes to the great precision of the overall stereo image.

Press and Reviews

Focal Magazine Guide
Focal Magazine

Guides & Advice
by Moon Audio


Tweeter with very low directivity for a flexible listening position
Designed without a port, but with a double passive radiator, allowing it to be placed near a wall
Numerous settings for optimal integration
Accurate control, even in the very high end
Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone standm the ceiling or a wall (mounting accessories not supplied)
Frequency response (+/-3dB) 50Hz - 35kHz
Maximum SPL (musical signal) 106dB SPL (peak @ 1m)
Electronic section
Inputs/Impedance Type XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation
Midrange and low frequency amplifier 60W, class AB
High frequency amplifier 25W, class AB
Automatic standby Standby on After approximately 30 minutes with no signal
Standby off Signal detection > 3 mV
Electrical supply Voltages 200-240V (T500mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse)
Connection IEC plug and detachable power cord
Settings High pass filter Adjustable Full range 45/60/90Hz
Bass (0 - 250Hz) Adjustable, +/-6dB
Midrange/bass (160Hz, Q=1) Adjustable, +/-3dB
High (4.5 - 35kKz) Adjustable, +/-3dB
Power On / Power Off On/off switch on rear panel
Standby consumption < 0.5W
Displays and controls LED for power on/off and standby
Woofer 5" (13cm)
Flax Cone
Tweeter 1" (25mm) 'M' profile Aluminum-Magnesium
Construction 0.6" (15mm) MDF
Finish Vinyl, real walnut and black painting
Dimensions with four rubber feed (HxWxD) 12.3 x 7.5 x 9.5"
(312 x 191 x 242mm)
Weight 20.7lb (6.5kg)

Package Includes

  • One Speaker
  • 5-Year Warranty

    five year warranty



Customers Also Viewed