Bryston 10B-SUB Electronic Crossover
The 10B-SUB is an ideal signal-handler with flexible control functions, perfect for your bi-amp'd or tri-amp'd system.
The Bryson 10B-SUB Electronic Crossover is designed to be an ideal signal-handler with enormously flexible control functions. The 10B-STD facilitates the implementation of bi-amp’d and tri-amp’d systems with a precisely tailored response. It can also be used to implement Linkwitz-Riley filters and (when special ordered with custom crossover points) it may also be used as both an infra-sonic and ultra-sonic active filters.
Bryston’s Model 10B Electronic Crossover combines ideal signal-handling with an enormously flexible control function. Simple, direct front-panel switches allow any crossover curve to be set instantly, and the signal purity is always maintained.
The crossover may be used in any of three connections: 2-way stereo, 3-way mono, and a special configuration, 2-way stereo with summed low pass out to allow the use of one sub-woofer. The 10B is available in two stock versions, a 10B sub incorporating frequencies more suitable to sub-woofer applications and a 10B standard which is more applicable to speakers reacquiring frequency control in the midband and tweeter areas.
All crossover selections are extremely accurate and repeatable, being implemented with 1% selected metal-film resistors and polystyrene capacitors. All switches are heavily goldplated, for lifetime protection from corrosion. The levelcontrols are precise 1dB increments, also derived from gold-plated switches and 1% metal-film resistors. Most important, however, is that the Bryston 10B Crossover uses NO integrated circuits in the signal path. All internal buffer and amplification stages are Bryston’s exceedingly linear and superbly quiet discrete op-amp circuitry. This means the signal is always maintained as “Audiophile Quality”, with stability and freedom from noise and distortion unapproached in other crossovers.
From the point of view of adaptability, flexibility and signal integrity, the Bryston 10B Electronic Crossover is the ideal choice for the widest range of multi-way speaker installations.
The Model 10B features independently selectable crossover points for high-pass and low-pass, in case the speaker installation requires slightly overlapped, (or slightly staggered), response curves for the drivers. You can also independently select crossover slope, from 6, 12, or 18dB/Oct., where one driver requires raster cutoff than another in the same system.
Inputs: XLR balanced or RCA single ended*
Outputs: XLR balanced or RCA single ended*
Selectable Frequencies: 40 Hz, 50 Hz, 60 Hz, 70 Hz, 80 Hz, 90 Hz, 100 Hz, 200 Hz, 250 Hz, 300 Hz, 400 Hz, 500 Hz
- Stereo 2-way
- Stereo 2-way summed low pass
- Monaural 3-way
- 1st, 2nd and 3rd order Butterworth filters in all modes
- 12 selectable crossover points for each filter
- One 11 step precision attenuator for each channel (in either low pass or high pass filter)
- 19” rack mountable faceplate (1U)