Blue Dragon Portable Interconnect V3
This is the Blue Dragon V3 Mini Portable Interconnect. It has been designed to maximize signal connections of portable gear in a home environment. Where flexibility of the cable is not a concern. It will provide the best signal transmition from your Computer Audio Card or Portable Player (for example) to your home audio system. It is a perfect option to connect the audio output of your computer to a pair of active power desktop speakers like the Fostex PM0.4n Professional Studio Monitor
It has the same geometry structure as the Silver Dragon Version 3 only it uses UP-OCC pure copper. It uses 2 cables in stead of one as used with the Blue Dragon V3 Portable Mini Cable.
It is a very Neutral/Natural sounding cable. It will not add coloration to the sound. But will greatly improve dynamics and deatail to the sound signature. Great for Folk, Rock and Roll, Bluegrass, Jazz etc, where small bands have lots of instrument seperation.
One end of this cable is typically terminated with a 3.5mm connector, to RCAs on the other end. We use 2 discreet runs of Blue Dragon cable vs. 1 run with the Portable Mini Cable. if right angle 3.5mm mini plug is required then see Moon Audio Blue Dragon V3 Portable Mini Cable.
The same geometry structure is used as the Silver Dragon Version 3 only it uses UP-OCC pure copper.
The cable uses a 4 99.999% pure copper 24AWG Teflon insulated stranded conductors.
Each conductor is made up of a special varying size stranding geometry. The silver stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.
The conductors are then surrounded by cotton and then a layer of Teflon tape.
The new version is now also shielded and placed in a polyethylene jacket for further protection.
The Version 3 is quieter than the previous versions with no micro phonics.
It uses the Cardas GRCM connector which is the connector standard. This male RCA connector is made of non-magnetic, eutectic Brass, Rhodium over Silver plate, with a gold plated Brass cover. Upgrading to the WBT will add a slight increase in resolution.
The wire is soldered to the Cardas connector with WBT or Cardas silver solder. The openness and detail of this cable is truly a benchmark at this price. As with all our stuff I offer a 30day money back guarantee. I recommend a 100hr break-in time, as silver takes longer to break in, but straight out of the box you will be amazed.
The cable is extremely smooth sounding with great low end and wonderful voicing.