Warm, smooth, musical. Immersive, “I’m there” sound. 99.99998% pure copper. More details
Upgrade your Ultrasone Pro headphones with a Black Dragon Headphone Cable. The Black Dragon falls on the warm end of neutral, making them a good choice for linear-neutral headphones. The Black Dragon warms bass and midrange tones, adding fullness and body to your headphones without making them sound laid back or lush. The Black Dragon will also smooth out the top end without sacrificing detail while making the midrange sound more musical. It's a great cable for vocals and a range of music genres, particularly Rock and Roll, Electronica, R&B, and Pop.
The Black Dragon uses 4 x 21.5AWG Teflon-insulated stranded conductors using pure single crystallized UP-OCC pure copper with 7N purity 99.99998% that enhances depth and definition in your music, giving you more of that "I'm there" feeling. Get ready for a truly immersive listening experience that will make you fall in love with your headphones all over again!Compatible with Ultrasone Pro 2900, Pro 900, Pro 750, Pro 550, HFI2400, and HFI2200.
NOTE: This cable does NOT plug into the original Edition 8 headphones. Edition 8 must be hacked by hardwiring the upgrade cable to the drivers. We also make an Ultrasone headphone cable for the Edition 5, Edition 5 Unlimited, Edition 8 Romeo & Julia headphones.
Most stock headphone cables are made of poor, ultra-thin conductors that work as a bottleneck for sound. Poor geometries, no shielding, rubber jackets, and a whole host of other issues in OEM cables can limit the performance of the headphone driver in terms of clarity and definition.
Dragon Cables are handcrafted from quality materials in Moon Audio's headquarters in Cary, North Carolina. All of our cables are created with ultra-pure, single-crystal silver and copper strands and engineered to provide the cleanest, most musical presentation. Our wire is void of impurities and crystalline boundaries, leaving nothing between you and your music.
The Black Dragon is warm and smooth with a musical presentation. Copper strands enhance the body, shape, and immediacy of the music. The detail and expansiveness of the Black Dragon make it a flexible fit where a broad range of musical genres are played. It can also improve bass frequencies on bass-light headphones.
The smooth, musical quality makes it a perfect fit for headphones that tend to sound a bit edgy or bright. Despite its warmth, the Black Dragon does not have a laid back, lush sound. It is much closer to neutral, making it a very natural sounding cable.
For more information on finding your signature sound, visit our Sound Signature Guide.
This cable uses a single-entry 3.5mm connection with an extended neck. It is compatible with the Pro Series line of headphones from Ultrasone, as well as DJ1 PRO, HFI 2200, HFI 2400 .
Most single-entry headphones use a single-ended connector. While cables with balanced headphone connections may use balanced or single-ended amplifier connectors, this is not true of single-ended connections. Combining a balanced amplifier connector with a single-ended headphone connection can short the circuit and damage the amplifier. This is why the amplifier connections for this cable are limited to single-ended options.
Beware of single-ended to balanced adapters on Amazon. For balanced single-entry headphones, like the Oppo PM-3, contact us for a custom cable.
We created our own connection system in order to plug right in to these Ultrasone headphones. This creates a tighter connection and it improves the sound, clarity, and dynamics. The cable is extremely smooth sounding with great low end and wonderful voicing. If you listen to a variety of music genres then this cable will suit your needs well. It is a little more rounded than the Blue Dragon with fuller sound and more bottom end weight.
The cable is extremely smooth sounding with great low end and wonderful voicing. It will also remove the veil from all headphones just like the Silver Dragon.
Most stock headphone cables are made of poor ultra thin conductors that work as a bottleneck for the sound. Poor Geometries, no shielding, rubber jackets and a whole host of other issues by OEM (stock) cables can limit what the headphone driver can produce in terms of clarity and definition. We use 4 x 21.5AWG Teflon insulated stranded conductors using pure single crystallized UP-OCC pure copper with 7N purity 99.99998%. This means more music, clarity and sound quality gets to your ears as purity in cable construction, cable design and quality of materials make a noticeable difference in the sound quality of your headphones.
Each conductor is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives. The conductors are then surrounded by cotton and then a layer of Teflon tubing. The new v2 version is now also double shielded and placed in a polyethylene jacket for further protection.
The Headphone connectors are soldered directly to the conductors of the cable using Cardas Silver Solder. The splicing method used by other cable companies using a stock cable's connectors is a poor method. We have developed many of the hard to find connection options utilizing plastic injection molded connectors. Great expense has been taken to bring as many hard to find connection systems for the most popular headphones. If you can't find the connection system you desire please contact us.
The Black Dragon offers a great well-rounded sound that suits most genres of music. It is a little warmer than the Blue Dragon with fuller sound and more bottom end weight.
Both the Blue and Black Dragon are not a laid back lush sound, they are closer to neutral, natural sounding cables. The Black Dragon is very smooth and musical and that is the best way to describe this cable. It is perfect for a headphone that can tend to sound a bit edgy or bright and its a great addition to improve the bass frequencies on a "bass light" headphone.
The Black Dragon can be used not only as a detachable cable for many varieties of headphones but it can also be used to hack your headphones. We can "hard-wired" to just about any headphone such as Grado, Sennheiser or AKG. You can also upgrade your existing headphones that have detachable cables with our Black Dragon. There are many connections to a variety of headphones to choose from on the menu above.
Dragon Cables are an easy do-it-yourself upgrade to your favorite headphones with detachable cables. With a wide array of connection options, a plug-and-play cable is just a few clicks away.
We also offer custom headphone hacks for your hard-wired cans, like many Grado, Sennheiser or AKG headphones. For more information on custom headphone modifications, visit our Hack Your Headphones portal.
Dragon Audio Cables are covered by a one-year limited warranty against material or manufacturing defects. For more information, visit our Warranty Terms page.