Audeze LCD-4Z Reference Headphones - B Stock
Save $900 on B Stock!
The Audeze LCD-4Z headphone uses a 15 ohm voice coil, making it much easier to drive than the original 200 ohm version. Magnesium rings with gold screens come standard, making it 25% lighter than the original model.
B Stock Headphones Straight from Audeze
We're never sure why they're considered B stock, but most items have a small cosmetic imperfection that didn't pass quality control. They carry a full manufacturer's warranty and are guaranteed to work or we'll replace them.
Returns are not accepted on B Stock items.
All B Stock Audeze headphones feature steel and leather suspension headbands.
- Over-ear, open-back
- Transducer type
- Planar magnetic
- Premium Leather for style and durability
- Magnetic structure
- Proprietary magnet array
- Phase management
- Magnet type
- Neodymium N50
- Diaphragm type
- Nano-scale Uniforce™
- Transducer size
- 106 mm
- Audeze Technology
- Flux density 1.5 Tesla
Large ultra-thin nano grade Uniforce diaphragms
Double Fluxor™ magnetic arrays
- Maximum power handling
- Maximum SPL
- Frequency response
- 5Hz - 20kHz
- <0.1% @ 100dB
- 15 ohms
- 98 dB/1mW (at Drum Reference Point)
- Voltage sensitivity
- 107 dB/1V (at Drum Reference Point)
- Minimum power requirement
- Recommended power level
- 1 - 4W
- LCD-4Z Headphones
- Professional travel case
- 1/4 in to dual 4-pin mini-XLR Premium LCD Headphone Cable with 1/4" (6.3mm) stereo phone plug
Note: The tensioned set screws in the sides of the headband's adjustment blocks are pre-set and glued in our factory, and are not adjustable. Do not attempt to adjust these screws, as damage may result that is not covered by warranty.
To avoid damage to your headphones and/or hearing, ensure the volume on your player is turned down before connecting your headphones. After placing headphones on your head, gradually turn up the volume until you reach a comfortable listening level. Exposure to excessive sound levels can cause gradual hearing loss and damage your headphones.
Excessive power levels can damage your headphones. Be sure to stay within the rated power levels of 5W RMS / 15W PEAK to minimize the risk of damage, which is not covered under warranty.