Cary Audio CAD 300 SEI Integrated Amp / Headphone Amp

In Store Listening Demo Available

Within its power range, the CAD 300 SEI integrated amplifier offers the most realistic sound reproduction one could desire for a "high-end" home audio system. Careful design, parts selection and proper circuit topologies contribute to incredible reliability and enjoyment. The CAD 300 SEI presents music with presence and directness, a result of single-ended circuit techniques, which eliminate crossover notch at low levels and also contributes to freedom from listening fatigue.

Special Edition

When only the Best will do for your Headphone Listening!!!!

With the Special Edition we have taken an already incredible piece of equipment and pushed it to it's sonic limits.

The 300B Coupling caps have been upgraded to the Cardas Golden Capacitors. The Snubber Caps have been replaced with Audio One Paper/Oil Capacitors. The signal path wiring is all Moon Audio Black Dragon OPOCC Ohno copper wire. The Noble potentiometer has been replaced with a DACT CT-2 Attenuator. The selector switch has been replaced with a Gray Hill switch. Upgrade tubes are also an option at additional cost. Our favorite are New Old Stock Sylvania 6SN7GTB for the Preamp stage and EAT 300B tubes in the amp section. The Transformer cans are painted to match the chassis. This is a customer chosen option for desired color. Cardas Binding Posts and RCAs are used for inputs and outputs. Black Diamond Racing cones are used for vibration isolation. And finished off with an ACME Silver Plated Fuse Holder. We threw the kitchen sink at this amp:)

Details

The CAD 300 SEI integrated amplifier offers the most realistic sound reproduction one could desire for a “high-end” home audio system. Careful design, parts selection and proper circuit topologies contribute to the incredible reliability and enjoyment.

For the technically minded, a review of the circuit is in order. Your new CAD 300 SEI operates in a class A single-ended mode utilizing an auto bias (cathode) system for the 300B triode output tubes. The input preamplifier section utilizes a 6SN7 dual triode tube. One triode section of this dual tube is used for the left channel and the other triode section is used for the right channel. This circuit is a Class A voltage gain circuit. This is the same basic first stage input circuit utilized in the Cary Audio model SLP 98 preamplifier. The next gain stage in the CAD 300 SEI utilizes a 6SN7 dual triode wired in a series constant-current plate-loaded configuration. This stage is duplicated for each channel. The series constant-current configuration then drives the 300B triode output stage in single-ended, class A. The output transformers in the CAD 300 SEI are the most important components in the amplifier and have been specifically designed by Cary Audio for use in the CAD 300 SEI. The output transformer is an air-gap design with a commercial continuous rating of 200% duty cycle. The CAD 300 SEI output transformer is an E/I laminate, silicon impregnated, grain oriented steel design. The windings are wax impregnated and the entire transformer is potted in high temperature wax. Utilizing the linear, directly heated filament-cathode 300B triode output tube, there is no global feedback used in the CAD 300 SEI. The power supply is a full wave center tap configuration running high voltage, high current fast switching diode rectifiers. The rectified 450 VDC is fed to a PI-L filter network. The filter capacitor consists of two (2) 1200 MFD and 230 Joules of energy storage. Each electrolytic capacitor is by-passed with a low impedance .22 polystyrene capacitor. The power transformer is a 200% duty cycle rating on the CAD 300 SEI. To avoid AC hum, both the 6SN7 and 300B tube have DC voltage on the filaments. This will prevent AC ripple voltage from capacitively being coupled to the elements in the tubes.

Additional Design Thoughts

A great deal of attention during the design of your new CAD 300 SEI was concentrated on the “overload recovery” ability of the amplifier to instantly recover from clipping and is a much more important issue tan is commonly believed. In the power war of amplifier manufacturers the mentality is focused on high and then even higher power output to solve the clipping problem. When in reality, the most critical aspect is how fast a recovery an amplifier can achieve after overload. Most of the music being listened to in an average listening room is only requiring about 3 watts of power. It is on the transients of loud low frequency program material that tremendous signal voltages will appear at the input of the amplifier. It is in this situation that the overload recovery ability of an amplifier is of critical concern. The single-ended CAD 300 SEI extols its merits in the ability to handle transients and instantaneously recover from brief or even extended overloads. The CAD 300 SEI will overload symmetrically at any frequency in the audio band pass. The CAD 300 SEI will also yield faithful reproduction of extremely low frequencies at full output levels. Power transformer, power supply regulation and output transformer design and careful shaping of the overall frequency response curve all play a very important part in the ability of the CAD 300 SEI to recover quickly when overloaded. If one were to monitor the high voltage rail voltage (385 VDC at the anode of the 300B tube) of a CAD 300 SEI during soft and loud music passages it will be found there is no more than a volt or so change from soft to loud passages.

Another technical feature of your new CAD 300 SEI is amplifier stability. The CAD 300 SEI may be operated with no load (without speaker) without damage to the amplifier, output transformer or tubes. This is the hallmark of a high performance, STABLE, amplifier circuit design.

Within its power range, the CAD 300 SEI integrated amplifier offers the most realistic sound reproduction one could desire for a "high-end" home audio system. Careful design, parts selection and proper circuit topologies contribute to incredible reliability and enjoyment. The CAD 300 SEI presents music with presence and directness, a result of single-ended circuit techniques, which eliminate crossover notch at low levels and also contributes to freedom from listening fatigue.

Review this product