Moon Audio Power Products

Silver Dragon Power Cord V1

 The Silver Dragon Power cord is the best of the best. No expense spared here. It was an all out design assault. We Started off with multiple size standings of 99.99998% pure UPOCC copper which is totally free from impurity and has practically no crystalline structural boundaries. It is the state of art copper designed by Dr. Atsumi Ohno of Japan. We then added a high purity silver layer over each strand and sealed the strand with Teflon. Thus every strand of each of the 2 main body conductors are are Teflon coated acting as an individual conductor. The resulting size of the 2 main conductors, one for Positive and one for Neutral, is approx 6awg. The process of stripping each conductor is painful. You should see my hands:)

The Ground wire is a 10awg silver plated 99.99998% pure UPOCC copper conductor as well, but the individual stands in this conductor are not covered in a Teflon coat. We had to cut cost some where:) Not to worry, no performance lost by this cut corner. The Geometry then has a boundary of a foil shield followed by a silver plated copper 100% braided shield. No noise will ever make it through.

 There is only one connector available that will handle this massive size and thank god it is one of the best. That being the Furutech FI-11s. The male outlet used is a Furutech FI-11M (gold) 15A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a 24 karat gold platting. The female IEC outlet is the Furutech FI-11(gold) 15A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a 24 karat gold platting. 

Add $40 for each additional 2'

For 20amp and foreign outlets contact us for pricing. 

Black Dragon Power Cord V1

The Black Dragon Power Cord was designed to be used with all equipment in mind DVD/CD Players, Dacs, to  Home Theater Processor/Pre Amps and Monster amps. A new geometry has been developed to create a noise free environment. 4-11Awg Stranded high purity slow drawn Copper conductors are used per cable in a star Quad configuration. Each conductor is made up with a special selection of stranding sizes. 2 for the positive and 2 for the negative. this yields a 8awg total size per signal polarity All conductor are wrapped in Teflon tape which is the next best dielectric after Air. Teflon tape is a way to reduce the overall thickness of the casing to reduce the dielectric value. The 4 conductors are then twisted together and Teflon taped as well. The cable has a single 100% coverage shield but can be doubled up for noisy environments. And is relatively flexible.

The cable is covered in 2 layers of Techflex braiding for added protection and good looks. The male outlet used is a Furutech FI-11M (gold) 15A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a 24 karat gold platting. The female IEC outlet is the Furutech FI-11(gold) 15A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a 24 karat gold platting. The cable is dead quiet and rejects all EMI and RFI interference. The cable is good for 15 and 20amp rating. 20 Amp versions come with the Furutech FI-31M (gold) 20A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a 24 karat gold platting. We also stock Schuko and UK Furutech Plugs as well as an upgrade path to the Top Line Furutech Plugs.

 US Version FI-11 Furutech US 15amp

Schuko Version 15amp IEC

UK Version 15amp IEC

 AU Version 15amp IEC

Mini Black Dragon Power Cord Call for pricing

For Monolithic Audio, Perpetual Technologies etc...

Blue Dragon Power Cord V2

The Blue Dragon Power Cord is our best bang for the buck power cord.  The version 2 is a new geometry entirely. The only similarity to version 1 is that we continue to use Silver Plated Copper conductors. We have changed the stranding count and added more shielding and made it more flexible. We have improved the copper material to UP-OCC and use pure 99.998% silver plating. It is relatively flexible when compared to other power cords. Our Black Dragon Power cord is the most flexible.

3-11Awg Stranded high purity slow drawn UP-OCC Copper conductors with a 99.998% silver plating.

Stranded section. 1 for the positive 1 for the negative and 1 for the ground. 

Single aluminum foil shield.

Silver plated copper 100% coverage shield.

CL3 insulation and PVC jacket.

Black TechFlex outer garment.

The cable is covered in a layer of Techflex braiding for added wear protection and good looks. We offer 2 connection price points. On the base model we use the Economy Wattgate 5266 male connector and the Economy Wattgate 320IEC. On the Top-line we use the male Furutech FI-15M (rhodium) 15A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a rhodium plating. The female IEC outlet is the Furutech FI-15E(rhodium) 15A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a rhodium plating.. The cable rejects all EMI and RFI interference. The cable is good for 15 and 20amp rating. 20 Amp versions come with the economy Wattgate 320IEC HC female plug or Furutech FI-31M (gold) 20A/125V 3-PRONG PLUG Black plug that is Alpha Copper based with a rhodium plating. We also stock Schuko and UK Furutech Plugs as well for you out of US folks..

Terminated with Furutech Plugs