Moon Audio Headphone Cable

There are 2 versions of all the Headphone cables below. Those that can be connected to your Headphones directly with no modification such as the Sennheiser HD650, Sony Qualia or AKG min xlr type. Basically any cable that have a connection system. Please contact us for other connection headphone types. The second version is for cables that are hard wired. We can hard wire any of the cables below for the price of the cable listed below plus $40. This $40 cost is for most common Headphones. There are some that need additional modification please contact us for pricing. Visit our Headphone Modification page for some examples.

Silver Dragon Sennheiser Headphone Cable Version 2 (For New HD800 pics go Here)

This is the new Version 2 Silver Dragon Headphone cable for Sennheiser HD-800 , HD-650 , HD-600 and HD-580 headphones and any other Sennheiser headphones that have the 2 pin connection system. We also use it for the Sony Qualia, AKG Pro Series and any other headphone that uses a connector attachment System. This cable can also be hard wired to Grado's, AKG, Audio Technica etc etc...

The cable uses a 4 x 99.998% Ultra Pure Silver 24AWG Teflon insulated stranded conductors.

Each conductor is made up of a special varying size stranding geometry. The silver stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.

The new version is now also shielded and placed in a polyethylene jacket for further protection.

The pin connectors are soldered to the conductors and then molded to the cable. The splicing method used by other cable companies using a stock Sennheiser cable's connectors is a poor method. And defeats the purpose of replacing the cable. That method requires you to once more send the signal through the poor quality conductors in the stock Sennheiser cable as well as through one more solder joint. Moon Audio, Cardas and Zu are the only three cable companies I am aware of that use a preferred method of headphone connection method

The wire is soldered to the connector of your choice with Cardas silver solder. The default 1/4" Plug is the Furutech FP-704(G). The default 1/8" plug is a Neutrik NYS231B. And the default XLR is the Black Neutrik NC3. The wire is then covered in 1 layers of Techflex braid.

The detail and speed of this cable is truly amazing in the midrange and high frequencies. It will shock you how much of a difference it will make over the stock cable. And will remove the veil all Sennheiser headphones seem to have.

If you listen to Jazz, Blues, Classical, Acoustical or any very detail orientated styles of music, then this is the cable for you.

As with all our stuff I offer a 30day money back guarantee. I recommend a 100hr break-in time, as silver takes longer to break in, but straight out of the box you will be amazed. A good place to look at reviews of the Silver & Blue Dragon Head Phone Replacement Cables is at the Head-Fi forum. Here is a link to one of the many reviews.

Bulk Silver Dragon Headphone cable available for DIY purpose (Red color): $15.50/ft

Length	AKG Style 3 pin mini XLR Version (K702 & Studio)	Sennheiser HD570 & HD590 Version	Sennheiser Version * (see below for models)	Balanced Sennheiser Version * (see below for models)	HD 800 Version	Balanced HD 800 Version	New Ultrasone & M-Audio Version
5 ft	$215	$215	$225	$250	$300	$325	$215
10 ft	$265	$265	$275	$300	$350	$375	$265
15 ft	$315	$315	$325	$350	$400	$425	$315

Blue Dragon Sennheiser Headphone Cable Version 3 (For New HD800 pics go Here)

This is the new Blue Dragon Headphone Version 3 headphone replacement cable for Sennheiser hD-800 ,HD-650 , HD-600 and HD-580 headphones and any other Sennheiser headphones that have the 2 pin connection system. We also use it for the Ultrasone, Sony Qualia, AKG Pro Series and any other headphone that uses a connector attachment System. This cable can also be hard wired to Grado's, AKG, Audio Technica etc etc...

This cable been designed to match the Silver Dragon Headphone cable but with a high purity copper conductor using the Ohno Continuous Casting Process. It has the same geometry structure as the Silver Dragon Version 2 only it uses UP-OCC pure copper.

The cable uses a 4 x 24AWG Teflon insulated stranded conductors using pure single crystallized UP-OCC pure copper with 7N purity 99.99998%.

Each conductor is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.

The new version is now also shielded and placed in a polyethylene jacket for further protection.

The wire is soldered to the connector with Cardas silver solder. The default 1/4" Plug is the Furutech FP-704(G). The default 1/8" plug is a Neutrik NYS231B. And the default XLR is the Black Neutrik NC3. The wire is then covered in 1 layer of black Techflex braid. The black over blue jacket give it a dark blue color.

The cable is extremely smooth sounding with great low end and wonderful voicing. And will remove the veil all Sennheiser headphones just like the Silver Dragon. Most stock headphone cables are made of poor ultra thin conductors that work as a bottle neck for the sound.

If you listen to Rock, Alternative, Rap or Techno etc, then this is the cable for you.

As with all our stuff, we offer a 30day money back guarantee. We recommend a 40hr break-in time, but straight out of the box you will be amazed. A good place to look at reviews of the Silver & Blue Dragon Head Phone Replacement Cables is at the Head-Fi forum. Here is a link to our reviews.

Bulk Blue Dragon Headphone cable available for DIY purpose (blue color): $8.50/ft

Length	AKG Style 3 pin mini XLR Version (K702 & Studio)	Sennheiser HD570 & HD590 Version	Sennheiser Version * (see below for models)	Balanced Sennheiser Version * (see below for models)	New Ultrasone & M-Audio Version	HD 800 Version Available 8/2009	Balanced HD 800 Version Available 8/2009
5 ft	$165	$160	$175	$200	$165	$250	$275
10 ft	$215	$210	$225	$250	$215	$300	$325
15 ft	$265	$260	$275	$300	$265	$325	$350
20 ft	$315	$310	$325	$350	$315	$350	$375

This is the Black Dragon Headphone Version 1 headphone replacement cable is our premiere hard wiring cable. This cable can hard wired to just about any headphone such as Grado's, AKG, Audio Technica etc etc...It is a wonderful match for the Grado GS-1000 and AKG k701. The Sennheiser version is also available again. As well we can create a version for your AKG Studio line with the Mini XLR from switchcraft

The cable uses a 4 99.999% pure Copper Litz 21.5 AWG Teflon insulated stranded conductors.

This Cable is unshielded. A shield is not necessary based on the geometry we have developed..

For the Sennheiser version the pin connectors are soldered directly to the conductors of the cable. The splicing method used by other cable companies using a stock Sennheiser cable's connectors is a poor method. And defeats the purpose of replacing the cable. That method requires you to once more send the signal through the poor quality conductors in the stock Sennheiser cable as well as through one more solder joint. Moon Audio, Cardas and Zu are the only three cable companies I am aware of that use a preferred method of headphone connection method

If you listen to any type of music then this is the cable will suit your needs. It is a little more rounded than the Blue Dragon.

As with all our stuff we offer a 30day money back guarantee. we recommend a 100hr break-in time, as silver takes longer to break in, but straight out of the box you will be amazed. A good place to look at reviews of the Silver & Blue Dragon Head Phone Replacement Cables is at the Head-Fi forum. Here is a link to one of the many reviews.

Length	AKG Style 3 pin mini XLR Version (K702 & Studio)	Sennheiser HD570 & HD590 Version	Sennheiser Version * (see below for models)	Balanced Sennheiser Version * (see below for models)
5 ft	$190	$190	$200	$225
10 ft	$240	$240	$250	$275
15 ft	290	290	$300	$325

Designed specifically for Sennheiser HD-580, HD-600 and HD-650 headphones, the custom designed Cardas cable significantly improves performance by replacing the less than ideal stock wiring. Proprietary molded mini headphone connections eliminate unnecessary soldered connections found in other replacement cables, thus improving signal transfer. The upgrade cable is pure Cardas all the way. Its advanced conductor is pure copper Litz in a patented Golden Ratio, Constant Q, and Cross-Field configuration for best performance.

Ultrasone is proud to have partnered with another great, innovative audio company to provide our users with a great accessory for Ultrasone headphones. Cardas Audio uses a proprietary cable winding technique to create some of the finest audio cables in the world and we are proud to offer that great technology with ours for an even better listening experience. Cables come in 10',15',20' and 25' foot lengths and attach with the standard proline screw-in adapter.

Bulk Cardas Headphone cable available for DIY purpose (light blue color): $8.50/ft

Length	Standard For Sennheiser Headphones (Available)	Standard For AKG Headphones (Available)	Balanced For Sennheiser Headphones (Available)	HD 800 Version Available 8/2009	Balanced HD 800 Version Available 8/2009	Balanced For AKG Headphones (Available)
10 ft	$220	$200	$260	$285	$325	$240
15 ft	$290	$270	$330	$350	$400	$310
20 ft	$350	$330	$390	$425	$450	$370

Add $100 For Cardas Rhodium Plated XLRs for any balanced version

Custom Built At Moon Audio (This version is the color Blue and can be covered in Techflex for custom Looks) Contact us for pricing

Length	Sennheiser HD570 & HD590 & Ultrasone Version	AKG Style 3 pin mini XLR Version (K702 & Studio)
10 ft	$180	$200
15 ft	$230	$250
20 ft	$280	$300

Length	Cardas Extension Cable	Blue D Extension Cable	Silver D Extension Cable	Black D Extension Cable
10 ft	$145	$155	$205	$185
15 ft	$170	$180	$245	$225
20 ft	$195	$205	$285	$265
Additional 5' Length Add:	$25	$25	$40	$40

Black Dragon Neutrik 4pin XLR to Cardas 1/4" Spades. Blue/Green Color Coded side is left channel

Blue Dragon Neutrik 4pin XLR to Cardas 1/4" Spades. Blue Color Coded side is left channel

Length	Blue Dragon Extension Cable	Black Dragon Extension Cable	Silver Dragon Extension Cable
4 ft	$105	$135	$160
8 ft	$145	$175	$200
12 ft	$185	$215	$240
Additional 5' Length Add:	$25	$40	$40

Length	Blue Dragon Extension Cable	Black Dragon Extension Cable	Silver Dragon Extension Cable
4 ft	$80	$90	$115
8 ft	$120	$130	$155
12 ft	$160	$170	$195
Additional 5' Length Add:	$25	$40	$40

Length	Blue Dragon Conversion Cable	Black Dragon Conversion Cable	Silver Dragon Conversion Cable
4 ft	$105	$125	$150
8 ft	$145	$165	$190
12 ft	$185	$205	$230
Additional 4' Length Add:	$40	$40	$40

Moon Audio is proud to announce the long awaited way for you DIYers to be able to build your own Senn cables.

Price $16/pair. one Red one Black.

Theses may need a little modification for Phones such as the HD25. But simply add some hot glue in the pocket once you solder your wires and then add a piece of Heashrink. We will make heatshrink available as well for your project.

This is used to convert the load of your headphones. This particular version had 2 Vishay VK-55 resistors for use with a pair of Beyerdynamic DT 990. The value of 125ohm was used. $65 each and will use Caddock resistors.

Available now Cardas Sony Qualia 010 Cable (10' $200, 15' $250, 20' $300) Built in House

Stax to Sennheiser HE90 Orpheous and vice versa conversion cables. ($200 for 5')