Epos M5

$650 Demo ($500 Shipped)

The M5 speaker is the smaller of the two bookshelf speakers in the current M series range of products.

In designing this fully shielded 2-way bass reflex design speaker, the Epos engineering team has fully considered the demands of today’s home theatre requirements. Importantly the speaker equally stands its ground in the world of two-channel audio.
The fully shielded M5 uses a 25mm metal dome tweeter with a neodymium magnet. The 137.5mm woofer uses the new Epos die cast aluminium chassis and features a phase plug. The speaker has provision for bi-wiring.

If the M5 is used in a home cinema application, the Epos M8 centre channel is the ideal choice.

Epos has designed a stand suitable for the M5 – the ST35, available in either black or silver.

The choice of three finishes in real wood veneer, ensures the speaker will integrate into the furnishings of any home. With a front veneered baffle, the M5 is equally attractive without the grilles and the addition of the Epos name moulded into the tweeter is an elegant feature.

Brochure

Stereophile Review

Creek OBH21 Headphone Amplifier

We have a demo available for $250

CREEK OBH-21 & OBH-21SE HEADPHONE AMPLIFIERS
Direct replacements for the successful OBH-11/11SE these latest headphone amplifiers from creek have been restyled with a brushed silver front panel and increased case depth, to keep in style with the rest of the Creek family of products. Both amplifiers now feature two headphone sockets.

The OBH-21 is a minature audio amplifier, designed specifically to drive two pairs of low to medium impedance (30ohm-300ohm) headphones from a line level source. The OBH-21SE is a high-end version using more expensive components and (OBH-2) power supply. It is more efficient to have a small amp to do this rather than waste the power of a full size one when only driving headphones.

The OBH-21 and OBH-21SE are compatible with any source at line level. For example: an average output level CD player can be connected directly to the input of the OBH-21/21SE, just as it could also be used in conjunction with a stand-alone pre-amplifier or integrated amplifier which doesn't have a headphone output.

Read the What Hi-Fi Review - May 2003 (180K) here

The OBH-21 is not designed to be connected to the high level speaker output of an integrated or power amplifier. Output level is controlled by the high quality volume control on the front panel.

Technical Specifications - OBH 21/21SE
Output power >10 mW into 30 to 300 ohm loads
Size 180 mm x 100 mm x 65 mm
Weight 670 gms