Epos

Epos ELS3

$399

ELS3

The first in a line of lower cost speakers, the ELS-3 mini monitor maintains the high standards expected of any product bearing the Epos name.

Designed not only for high performance two channel operation, these new competitively priced Epos speakers will further satisfy a requirement in the 5.1 home cinema market, ensuring there is no need to compromise the audio quality in the name of home entertainment.

Utilizing a two-way bass reflex design, the ELS3 incorporates a 130mm woofer with injection molded polypropylene cone with dust cap and rubber rolled surround on a heavy die-cast aluminum chassis. It has a dual magnet and shielding can, further enhancing its use in a home theatre application.

The 25mm aluminum dome neodymium tweeter is an entirely new Epos design and features the Epos logo directly molded onto the faceplate. In true Epos style, the ELS3 has a minimalistic crossover.

In a deviation from the Epos real wood veneer cabinet, this new ELS3 cabinet features a vinyl wrap finish allowing the cost to be highly competitive. The choice of three colors remains, enabling the addition of these speakers to complement earlier models, should they be desired for use in a rear channel application.

As you would expect from the manufacturer of such a well-respected brand, this new and exciting Epos ELS3 has a performance level that has to be heard to be believed.

Technical Specification

Power Handling	100 Watts Max
Frequency Response	65Hz - 20kHz
Impedance	4 Ohms Nominal
Sensitivity	87dB/1 watt/1 meter
Amplifier Compatibility	25 - 100 Watt
Configuration	2 Way
Finish	vinyl wrap
Weight	4.5kg
Size W x H x D (mm)	175 x 270 x 195

Brochure

Stereophile Review

Class C Loudspeakers:

Epos ELS3 - "...a level of detail resolution I normally associate with speakers approaching $1000/pr...I can think of no speaker that produces greater sound quality for the dollar." BJR Vol.27 No.1 WWW)

THE ABSOLUTE SOUND 2006 EDITORS' CHOICE AWARDS

Loudspeakers Under $500

Epos ELS3 - "...strives to give you big sound from a small box, and does a much better job than most...good midrange and treble clarity, superb three-dimensionality, and just enough upper midbass weight to keep you from missing the lower frequencies that aren't there." CM issue 145

Epos ELS3C

$349

The Epos ELS 3C centre channel utilizes the same drive units as the ELS 3 and is therefore ideally matched for use in a home cinema application.

Featuring a 25mm metal dome tweeter with neodymium magnet, together with two 5 ½” woofers, this centre channel uses a new die cast aluminum chassis with a cone and surround similar to that being used in the M5 woofer. The Epos logo is embossed on the tweeter faceplate.

In designing this centre channel, we have introduced an unusual and acoustically advanced crossover which reduces the coloration when two mid/bass units are in close proximity to each other.

Available in a choice of three finishes, the Epos ELS 3C centre channel is ideal for use with other ELS products in a home cinema application.

Technical Specification

Power Handling	100 Watt Max
Frequency Response	65 Hz - 20 kHz
Impedance	8 Ohm nominal
Sensitivity	87dB/1W/1m
Amplifier Compatibility	25 - 100 Watt
Configuration	Centre Channel
Finish	Vinyl Wrap
Weight	8.8kg
Size W x H x D (mm)	510 x 174 x 195

Brochure

Epos ELS303

$899

Entering the marketplace in June 2005 the ELS 303 is the latest powerful new speaker from Epos. Combining the sonic strengths of the ELS 3 bookshelf speaker with an integrated 130mm woofer, this 2 ½ way floor-standing speaker now covers a much wider range of frequencies than a bookshelf or stand mount speaker can.

The ELS 303 utilizes the Swift Tweeter and Lightning 130 midrange driver from the ELS 3 with improvements to the cross-over and midrange linearity. Epos has also developed a new 130mm woofer, based upon the same chassis as the Lightning 130 midrange. It can be differentiated by the round dust cap and lack of cone damping material used on the outside. The woofer is coupled to the rest of the speaker in a 2 ½ way fashion with a high linearity crossover which rolls off at 100Hz. This combines with the low frequency output of the midrange to give added power handling to the bass, while maintaining a very slim 150mm front baffle, which improves imaging at high frequencies.

The cabinet has the same footprint as the ELS3 but the height is 87.5cms, including the plinth but not spikes. This brings the tweeter up to the optimum 81cms listening height to the user, when seated. The midrange section is not ported. The woofer section is braced and sealed off from the midrange section and is tuned with a port to 47Hz, which determines the lower cut-off frequency of 43Hz for the speaker.

Because the ELS 303 is a tall and slim speaker, it needs to be stabilized to prevent it being accidentally knocked over. Epos has designed a PVC foiled MDF plinth, which is attached to the bottom of the cabinet with 6mm bolts. The plinth increases the footprint of the speaker to make it more stable. 6mm spikes are also supplied to help decouple unwanted energy from the cabinet/plinth, when in use, through to the floor.

To enable the user to connect the bass driver separately from the midrange and tweeter, a gold plated bi-wiring terminal is used. Metal links join the upper and lower sections together and can be removed by the user to allow bi-wiring.

Technical Specification

Power Handling	200 Watts Max
Frequency Response	48Hz - 20kHz
Impedance	4 Ohms Nominal
Sensitivity	87dB/1 watt/1 meter
Amplifier Compatibility	50 - 200 Watt
Configuration	2 1/2 Way
Finish	vinyl wrap
Weight	10kg
Size W x H x D (mm)	850 x 175 x 195

Brochure

Review

THE ABSOLUTE SOUND 2006 EDITORS' CHOICE AWARDS

Loudspeakers $500 - $1000

Epos ELS303 - "Blessed with a good measure of openness, especially in the midrange, excellent imaging, and a touch of natural warmth, this is an affordable speaker with which to sit back and simply enjoy the music." CM issue 163

Epos ELS Sub

$799

The ELS SUB has a massive and powerful 10” loudspeaker driver fitted to the front of the cabinet, with enough magnet strength and voice coil size to handle very high power levels for long periods without distress. Its cone diaphragm is very stiff to keep distortion and coloration to a minimum. The rubber suspension surround is smaller than normal and quite stiff, which also helps to reduce distortion and low frequency over-hang. In short it has been designed to be more appropriate for a two-channel bass unit than a conventional sub-woofer.

To further boost the fidelity of the ELS SUB it has a very stiff cabinet with extensive internal bracing which is rarely found in conventional subwoofers. It has a completely separate section at the back of the cabinet to house the amplifier, which is more normally found in professional speakers and not found in conventional subwoofers at any price.

To further improve the sound quality Epos does not use port tuning to achieve increased bass extension, which avoids ‘chuffing’ air turbulence noises interfering with the fidelity of the loudspeaker.

As a general rule, stereo systems tend to be difficult to integrate with conventional sub woofers because, for the most part, sub woofers are generally not designed to match them, and therefore suit 5.1 systems only. The Epos ELS SUB is different and was conceived as a means of extending the frequency response of a small pair of bookshelf speakers, rather than just producing large outputs at one particular frequency, such as 60 Hz.

This may appear to contradict established principles, but Epos engineers have not limited themselves to only trying to produce a product that plays ‘one note’ sound. For that reason the ELS SUB is capable of extending low frequencies with a relatively flat response down to 20 Hz. This is most unusual and would normally be unheard of in conventional woofers, because apart from anything else their cabinets and amplifiers would rattle and buzz, due to the simple method of construction used.

As a consequence of the design principles, this ELS SUB is dynamic when part of a 5.1 system.

Back panel controls include High Level Input, Volume, Low Filter, Power Switch (when left on with no signal the sub’s standby feature activates, AC Voltage Selector Switch, High Filter, Phase, Low Level Input, and High Level Input.

Additional features to be found in this sub are both over current cut-out and over temperature cut-out. The ELS SUB does not use a compression limiter to pre-distort the signals it cannot handle. No amplifier has infinite power capabilities and has to be protected against destroying itself under extreme conditions. To protect the sub’s 300W amplifier from excessive current demands it has been designed to cut the signal to the speaker in the event of an overload. The sound output is restored automatically immediately the demand is lower. To protect the amplifier from damage caused by excessive heat, there is a thermal sensor attached to the amplifier’s heatsink that is set to trip the output if the internal temperature exceeds a pre-set level. The reasons this might occur are high ambient room temperature, direct sunlight, high level operation for long periods and insufficient ventilation of the amplifier control panel.

With a finish similar to the ELS 3 speakers and ELS 3 centre channel, the new ELS SUB will be available in the same three finishes – light cherry, dark cherry and black ash. The sub woofer has a black fabric grille and is sold complete with spikes.

Technical Specification

Power Handling	300 Watts
Frequency Response	20 Hz to 150 Hz with high and low filter
Impedance	4 Ohms
Sensitivity	89dB per Watt
Amplifier Compatibility	Inbuilt
Configuration	10" Bass Driver
Finish	Vinyl Wrap
Weight	20 kgs
Size W x H x D (mm)	372 x 342 x 450

Brochure

Epos ELS 5.1

Call

Two pairs of ELS3 speakers, one ELS 3C centre channel and the powerful new ELS subwoofer make up this system and even though the 4 monitors are compact in size, they certainly do justice to large scale cinema sound requirements.

The individual features of each of the component parts of this 5.1 system can be found on the respective product pages. However the smooth integration of the six speakers is the key to the success of Epos’s first entry into the world of home cinema.

In reviewing this 5.1 system from Epos, the U.K. magazine What Hi-Fi loudly sings its praises - highlighting amongst other things ‘its prodigious timing’ and ‘its barnstorming movie capability’.

The Epos system was the overall Group Test Winner against some very strong competition.

Technical Specification

Power Handling	300 Watts
Frequency Response	20 Hz to 20 KHz
Impedance	8 Ohm nominal
Sensitivity	87dB/1W/1m
Amplifier Compatibility	25 - 100 Watt
Configuration	5.1 Surround Sound System
Finish	Vinyl Wrap
Weight	38 kgs
Size W x H x D (mm)	N/A

Brochure

Epos 12i

$1199

Traditionally the core of any Epos speaker series, the M12i is the ideal loudspeaker for those enthusiasts who prefer a stand-mount over a floor-stand option.

As with all speakers in the Mi range, the 12i is designed to meet all the demands of today’s two-channel and home-theatre audio. It is equally at home with music or movies and is fully magnetically shielded. If the M12i is to be used in a home theatre application, the M8i centre channel and M5i, used for rears, make ideal choices.

The M12i uses the revised Epos 25mm (1 in.) low distortion metal dome tweeter, designed to have smooth, clear and extended treble. Featuring a strong die-cast aluminum alloy face plate, molded surround, ferrite magnet and Ferrofluid cooling, it is a significant improvement over the earlier M tweeter. The upper frequency crossover is centered on 5kHz and the minimalistic 1st order crossover is simply a polypropylene film capacitor.

Epos has designed a robust new 165mm (6.5in.) mid-range woofer with die-cast aluminum alloy chassis, phase plug and molded polypropylene cone. Its curved cone profile and graduated thickness were engineered to ‘roll off’ high frequencies mechanically, in a smooth fashion. It also has very high power handling. As such, the woofer requires no electrical crossover to reproduce dynamic, natural bass and mid-range frequencies in this model. To reproduce bass cleanly and powerfully, it is loaded at the rear with a port flared at both ends, which reduces turbulence and distortion.

The bi-wirable input panel is made from solid anodized aluminum alloy, with sturdy high-spec terminals suited for spade lug or other types of plugs. High-grade metal links join the terminals together and can be removed for separate connection to each driver.

Equally attractive with or without the silk cloth grilles, the M12i is offered in a choice of three beautiful real-wood veneers. It seamlessly wraps around the front edges of the pattern matched cabinets. The front and rear baffles are 25mm (1 in.) thick to reduce unwanted vibration and coloration.

Component Overview
Tweeter: Epos 25mm aluminum dome with high-temperature voice coil, Ferrofluid cooling and ferrite magnet system. Magnetically shielded.

Bass/Midrange Driver: Epos mid-bass 165mm with polymer cone, 32mm high-temperature voice coil and die-cast aluminum chassis. Magnetically shielded.

Crossover: Mid-bass driver crossover is by mechanical design and without electrical network. Tweeter AC coupled with polypropylene capacitor, 6dB per octave at 3kHz.

Terminal Panel: Bi-wirable. Can be single or double wired by removing shorting links provided.

Technical Specification

Power Handling	120 Watt Max
Frequency Response	58 Hz - 20 kHz
Impedance	8 Ohm nominal
Sensitivity	87dB/1W/1m
Amplifier Compatibility	50 - 150 Watt
Configuration	2 Way
Finish	Real Wood Veneer
Weight	8kg
Size W x H x D (mm)	200 x 375 x 250

Epos M16i

$1999

The new Epos M16i is a floor-standing 2 ½ - way speaker which excels in accuracy, dynamics, imaging and poise. This speaker was designed to be equally dynamic in a two-channel or home theatre application. The result is a loudspeaker with deep bass, a fast dynamic sound and very high power handling. It is equally at home playing music or movies and is of course magnetically shielded.

The revised Epos 25mm (1 in.) low distortion metal dome tweeter used in the M16i is designed for smooth, clear and extended treble. It features a strong die-cast aluminum alloy face plate, molded surround, ferrite magnet and Ferrofluid cooling. The crossover is centered on 3kHz and incorporates film capacitors in critical locations.

The 140mm (5.5in.) mid-range driver, similar to that used in the M5i, runs in a sealed chamber, with the tweeter. It is designed to roll-off naturally around 90Hz, with useful output below that. The woofer and mid-bass output overlap and work effectively as one bigger unit. This reinforces the power and dynamics of this compact speaker.

The bass driver is similar to the midrange but has a dust cap instead of a phase plug. It is mounted in a separate chamber in the lower section of the cabinet and is loaded with a rear-firing port, flared at both ends for low turbulence and minimal distortion. It is also filtered by the crossover to limit frequencies above 100Hz.

Together, the woofer and mid-range units handle very high power. We recommended that the M16i should be partnered with an amplifier that is capable of driving a four Ohm load to high levels.

Internally, extensive bracing and 25mm (1 in.) thick front and rear baffles have been skillfully engineered to reduce unwanted cabinet vibration and coloration. The tri-wirable input panel is made from solid anodized aluminum alloy, with sturdy high-spec terminals suited for spade lugs or other types of plugs. High grade metal links join the terminals together and can be removed for separate connection to each driver.

Grilles are made of cloth, over an MDF frame, for easy integration with home furnishings, although the M16i is equally attractive without the grilles. A black lacquered integral plinth includes sturdy steel inserts which take adjustable 6mm carpet spikes (included). The plinth is removable if desired.

The M16i is offered in a choice of three beautiful real wood veneers, which seamlessly wrap around the front edges. Cabinets are grain-pattern matched on left and right speakers.

Component Overview
Tweeter: Epos 25mm aluminum dome with high-temperature voice coil, Ferrofluid cooling and ferrite magnet system. Magnetically shielded.

Bass/Midrange Driver: Epos Mid -bass 140mm, with injection-molded polymer cone and high-temperature voice coil, mounted on a die-cast chassis with phase plug. Magnetically shielded

Bass Driver: Epos Bass 140mm, with injection-molded polymer cone and high-temperature voice coil, mounted on a die-cast chassis with dust cap. Magnetically shielded

Crossover: Multi-element medium-order, at 150 Hz and 3 kHz. Tweeter has four components in a 3rd order filter at 3 kHz crossover, using film-caps throughout and a metal oxide resistor.

Terminal Panel: Tri-wirable. Can be single or double wired by removing shorting links provided.

Technical Specification

Power Handling	150 Watt
Frequency Response	48 Hz - 20 kHz
Impedance	4 Ohm nominal
Sensitivity	88dB/1W/1m
Amplifier Compatibility	50 - 200 Watt
Configuration	2.5 Way
Finish	Real Wood Veneer
Weight	15kg
Size W x H x D (mm)	175 x 885 x 210

Epos M5i

$899

The M5i two-way bass reflex speaker may be the baby of the new series, but its performance belies its size. It is equally at home in a two-channel or home theatre application. As you would expect, it is fully shielded magnetically.

The M5i includes our revised Epos 25mm (1 in.) low distortion metal dome tweeter, designed to have smooth, clear extended treble. This tweeter features a strong die-cast aluminum alloy face plate, molded surround, ferrite magnet and Ferrofluid cooling.

The new Epos 140mm (5.5in.) mid-range woofer reproduces dynamic, natural bass and mid-range frequencies. This robust drive unit has a die-cast aluminum alloy chassis and phase plug, with contoured molded polypropylene cone. To reproduce bass cleanly and powerfully, it is loaded with a port flared at both ends, which reduces turbulence and distortion. The crossover is centered on 3kHz and incorporates film capacitors in critical locations.

The bi-wirable input panel is made from solid anodized aluminum alloy, with sturdy high-spec terminals suited for spade lug or other types of plugs. High-grade metal links join the terminals together and can be removed for separate connection to each driver.

The front and rear baffles of the cabinet are 25mm (1 in.) thick to reduce unwanted vibration and coloration. In a choice of three pattern matched real wood veneers, the M5i will be equally at home in a traditional or contemporary setting. With its stylish silk cloth grille it integrates easily with home furnishings.

Component Overview
Tweeter: Epos 25mm aluminum dome with high-temperature voice coil, Ferrofluid cooling and ferrite magnet system. Magnetically shielded.

Bass/Midrange Driver: Epos 140mm with 25mm high temperature voice coil and injection molded PP cone mounted on an inert die-cast aluminum chassis. Solid metal phase plug. Magnetically shielded.

Crossover: Bass driver crosses over with three components in a 2nd order filter. Tweeter has four components in a 3rd order filter at 3 kHz crossover, using film-caps and a metal oxide resistor.

Terminal Panel: Bi-wirable. Can be single or double wired by removing shorting links provided

Power Handling	75 Watt
Frequency Response	60 Hz - 20 kHz
Impedance	4 Ohm nominal
Sensitivity	87dB/1W/1m
Amplifier Compatibility	25 - 100 Watt
Configuration	2 Way
Finish	Real Wood Veneer
Weight	6.5kg
Size W x H x D (mm)	174 x 325 x 230

Epos M8i

$849

Epos approached the design of its M8i centre channel speaker exactly as you would expect - with no compromise to sound quality. Engineered specifically for the critical requirements of centre-channel reproduction, it has powerful bass, a fast, dynamic sound and high power handling. It is, of course, magnetically shielded.

The M8i includes the revised Epos 25mm (1 in.) low-distortion metal dome tweeter, designed to have smooth, clear extended treble. This tweeter features a strong die-cast aluminum alloy face plate, molded surround, ferrite magnet and Ferrofluid cooling.

The new Epos 140 mm (5.5in.) high power mid-range woofer reproduces dynamic, natural bass and mid-range frequencies. Two such units are used in this model, isolated from each other in separate rear-ported enclosures and positioned either side of the tweeter. With two woofers working together at low frequencies, power handling and sound levels are greatly increased.

The M8i features an unusual crossover which reduces coloration from the two closely spaced mid-bass units. The upper crossover frequency is centered on 3kHz and incorporates film capacitors in critical locations. The bi-wirable input panel is made from solid anodized aluminum alloy, with sturdy high-spec terminals suited for spade lug or other types of plugs. High-grade metal links join the terminals together and can be removed for separate connection to each driver.

Centre channels can pose difficulties with placement but Epos has provided the perfect solution with the M8i. The cabinet is now rounded on the bottom and flat on the top. It is also supplied with a contoured plinth, so that the angle of the speaker can be adjusted to point at the listener.

The M8i is styled to complement any décor. With its silk cloth grille and beautifully manufactured real wood cabinets, it will easily integrate with all furnishings.

Component Overview
Tweeter: Epos 25mm aluminum dome with high-temperature voice coil, Ferrofluid cooling and ferrite magnet system. Magnetically shielded.

Bass/Midrange Driver: 2 x Epos 140mm with 25mm high temperature voice coil and injection molded PP cone mounted on an inert die-cast aluminum chassis. Solid metal phase plug. Magnetically shielded.

Crossover: Bass driver crosses over with four components in a 2nd order filter. Tweeter has four components in a 3rd order filter at 3 kHz crossover, using film-caps and a metal oxide resistor.

Terminal Panel: Bi-wirable. Can be single or double wired by removing shorting links provided.

Technical Specification

Power Handling	75 Watt
Frequency Response	60 Hz - 20 kHz
Impedance	8 Ohm nominal
Sensitivity	87dB/1W/1m
Amplifier Compatibility	25 - 100 Watt
Configuration	Centre Channel
Finish	Real Wood Veneer
Weight	10.1kg
Size W x H x D (mm)	510 x 175 x 220

Epos M22i

$2599

The current flagship of the Mi range of speakers, the 2 ½- way M22i, has deeper bass and higher power handling than the M16i. In designing the M22i, the Epos engineering team designed a high performance two channel speaker that would be equally at home in a home theatre application.

The M22i uses the revised Epos 25mm (1 in.) low distortion metal dome tweeter, designed for smooth, clear and extended treble. The upper frequency crossover is centered on 5kHz and the minimalistic 1st order crossover is simply a polypropylene film capacitor.

Epos has designed a robust new 165mm (6.5in.) mid-range woofer with die-cast aluminum alloy chassis, phase plug and molded polypropylene cone. Its curved cone profile and graduated thickness were engineered to ‘roll off’ high frequencies mechanically, in a smooth fashion. It also has very high power handling. As such, the woofer requires no electrical crossover (neither high pass, nor low pass) to reproduce dynamic, natural bass and mid-range frequencies in this model.

The mid-range driver runs in a sealed chamber, with the tweeter. It is designed to naturally roll-off around 80Hz, with useful output below that. The woofer and mid-bass output overlap and work effectively as one bigger unit. This reinforces the power and dynamics of this compact speaker.

The 165mm (6.5in.) bass driver is similar to the midrange but has a weighted dust cap instead of a phase plug. It is mounted in a separate chamber in the lower section of the cabinet and is loaded with a rear-firing port, flared at both ends for low turbulence and minimal distortion. It is also filtered by the crossover to limit frequencies above 100Hz.

Together, the woofer and mid-range units handle very high powers. We recommended that the M22i should be partnered with an amplifier that is capable of driving a four Ohm load to high levels.

The tri-wirable input panel is made from solid anodized aluminum alloy, with sturdy high-spec terminals suited for spade lug or other types of plugs. High grade metal links join the terminals together and can be removed for separate connection to each driver.

Great care has been taken with the manufacturing of the cabinets. They are grain pattern matched for each pair. Internally, extensive bracing and 25mm (1 in.) thick front and rear baffles have been skillfully engineered to reduce unwanted cabinet vibration and coloration. Grilles are made of silk cloth, over an MDF frame, for easy integration with home furnishings, although the M22i is equally attractive without the grilles. A black lacquered integral plinth, which includes sturdy steel inserts to take adjustable 8mm carpet spikes, completes the package.

Component Overview
Tweeter: Epos 25mm aluminum dome with high-temperature voice coil, Ferrofluid cooling and ferrite magnet system. Magnetically shielded.

Epos Mid-bass 165mm with polymer cone, 32mm high-temperature voice coil and injection molded phase plug mounted on a die-cast chassis with phase plug. Magnetically shielded.

Epos Bass 165mm with polymer cone, 32mm high-temperature voice coil and weighted injection molded dust cap. Die-cast chassis. Magnetically shielded.

Crossover: Mid-bass driver crossover is by mechanical design and without electrical network. 6 dB on bass driver. Tweeter is AC coupled via polypropylene capacitor, 6 dB per octave, at 3kHz.

Terminal Panel: Tri-wirable. Can be single or double wired by removing shorting links provided.

Technical Specification

Power Handling	250 Watts Max
Frequency Response	38 Hz - 20 kHz
Impedance	6 Ohm nominal
Sensitivity	87dB/1W/1m
Amplifier Compatibility	50 - 300 Watt
Configuration	3 Way
Finish	Real Wood Veneer
Weight	18.9 kg
Size W x H x D (mm)	185 x 900 x 252

Epos MSub

$1299

The M SUB has a powerful 10" loudspeaker driver fitted to the bottom of the cabinet, with 2" voice coil and large magnet size to handle very high power levels for long periods without distress. Its paper cone diaphragm is very stiff to keep distortion and coloration to a minimum. The rubber suspension surround is smaller than normal and quite stiff, which also helps to reduce distortion and low frequency over-hang. In short it has been designed to enable the M Sub to integrate perfectly with a two-channel system that requires additional bass extension. However, it is also well suited to the needs of a 5.1 system and can provide exceptional bass extension for movies.
To further boost the fidelity the M SUB has a very stiff cabinet with extensive internal bracing and thick walls, which is rarely found in conventional subwoofers. It has a completely sealed section at the back of the cabinet to house its high powered 300 Watt amplifier. This technique is more normally found in professional speakers.

To further improve the sound quality Epos does not use port tuning to achieve increased bass extension. This helps to avoid air turbulence noises ('chuffing') from interfering with the fidelity of the loudspeaker. It also avoids the usual peak in bass at one frequency that usually characterizes the sound of inferior 5.1 type subwoofers.

As a general rule, stereo systems tend to be difficult to integrate with conventional sub woofers because, for the most part, sub woofers are generally not designed to match them, and therefore suit 5.1 systems only. The Epos M SUB is different and was conceived as a means of extending the frequency response of a small pair of bookshelf speakers, rather than just producing large outputs at one particular frequency, such as 60 Hz.

This may appear to contradict established principles, but Epos engineers have not limited themselves only to designing a product that plays 'one note' sound. For that reason the M SUB is capable of extending low frequencies with a relatively flat response down to 20 Hz. This is most unusual and would normally be unheard of in conventional woofers because, apart from anything else, their cabinets and amplifiers would rattle and buzz, due to the simple method of construction used. As a consequence of the design principles, this M SUB is exceptionally dynamic when part of a 5.1 system.

Back panel controls include variable Volume, Low Filter, High Filter and Phase adjustment controls. Low and High Level Inputs allow the M sub to be driven either from loudspeaker outputs direct from a power amp or pre-amp signal, which will not load the driving amplifier as the M sub's low level input is high impedance. Its Power Switch features a standby function that sends the amplifier to sleep when not used and wakes up automatically when it receives a signal. The amplifier is able to work in most regions as it has an AC Voltage Selector Switch and mains fuse, accessible from the rear panel.

Additional features to be found in the M Sub are over-current protection and over temperature cut-out. The M SUB does not use a compression limiter to pre-distort the signals it cannot handle. However, no amplifier has infinite power capabilities and has to be protected against destroying itself under extreme conditions.

With a cosmetic design similar to the M series range of speakers, the M SUB is available in the three finishes - light cherry, dark cherry and black ash.

The M Sub is designed to be a down firing speaker, with fixed height legs to stand on. These can be used on their own or with the matching wooden plinth that protects the driver and allows the driver to breath properly. 6mm carpet spikes or soft foam pads can be fixed to the bottom of the plinth, depending on the floor surface or personal preference

Technical Specification

Power Handling	300 Watts Max
Frequency Response	20 Hz - 150 kHz
Impedance	4 Ohm nominal
Sensitivity	89dB/1W/1m
Amplifier Compatibility	50 - 200 Watt
Configuration	10" Sub
Finish	Real Wood Veneer
Weight	26kg
Size W x H x D (mm)	372 x 342 x 450

Epos ST12 Stands

$249

Ideally suited for the Epos M12 speakers, the ST12 stands are made from high quality steel. They are a simple open frame design, offering good support for the speakers.

Supplied as a multipart flat pack with self-assembly instructions, they include a choice of terminations. The options are either spikes or pads for the base and spikes or counter sunk screws for the top.

Measuring 20 cm wide, 25cm deep and 51cm high, and available in black only, these dedicated stands undeniably improve the performance of the Epos M12 loudspeakers.

Technical Specification

Stand height (without spikes)	51cm
Top plate size	19 X 23cm
Foot print size	36 x 32.6cm
Top spikes (Yes/No)	No
Sand fill (Yes/No)	No
Finish	Black only

Brochure

Epos ST35 Stands

$249

Designed to accommodate the smaller Epos bookshelf speakers – the ELS3 and M5, the ST35 metal stand is both elegant and functional and is available in a choice of either black or silver.

The ST35 stands 56 cm high (without spikes) and has a solid top plate measuring 17 x 15.5 cm. The bottom plate measuring 25 x 28 cm features an Epos badge. Three columns make up the supports, the larger of which has the added advantage of a cable channel.

This particular model does not have provision for the addition of sand fill. The stands are supplied in a self assembly format complete with top and bottom spikes.

Stand height (without spikes)	56cm
Top plate size	17 x 15.5cm
Foot print size	25 x 28cm
Top spikes (Yes/No)	Yes
Sand fill (Yes/No)	No
Finish	Black / Sliver

Brochure