Moon Audio Silver Dragon Headphone cable

The cable uses a 4 x 99.998% Ultra Pure Silver 24AWG Teflon insulated stranded conductors.
Each conductor is made up of a special varying size stranding geometry. The silver stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.
The conductors are then surrounded by cotton and then a layer of Teflon tape.
The new version is now also shielded and placed in a polyethylene jacket for further protection.

$15.50 per linear foot

Moon Audio Black Dragon Headphone cable

The cable uses a 4 x 21.5AWG Teflon insulated stranded conductors using pure single crystallized UP-OCC pure copper with 7N purity 99.99998%.
Each conductor is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.
The conductors are then surrounded by cotton and then a layer of Teflon tape.
The new version is now also shielded and placed in a polyethylene jacket for further protection.

$10.50 per linear foot

Moon Audio Blue Dragon Headphone cable

The cable uses a 4 x 24AWG Teflon insulated stranded conductors using pure single crystallized UP-OCC pure copper with 7N purity 99.99998%.
Each conductor is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. Making it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.
The conductors are then surrounded by cotton and then a layer of Teflon tape.
The new version is now also shielded and placed in a polyethylene jacket for further protection. 

$8.50 per linear foot

Cardas Headphone cable

The cable uses a 4 x 23.5 AWG Teflon insulated stranded conductors using Cardas Golden Ratio, Constant Q, Crossfield, Pure Copper Litz enameled copper conductors.
The conductors are surrounded by layer of Teflon tape followed by a 100% coverage shield and then another layer of Teflon followed by a polyethylene jacket for protection. 

$8.00 per linear foot

The cable uses 7 times 0.1mm silver plated oxygen-free copper conductors with a Gas-injected PTFE dielectric followed by a 100% coverage shield and a Teflon outer jacket. It is a lightweight RG-179 Type 75-ohm coaxial cable.

$5.00 per linear foot

DH Labs T14 Speaker cable

The Silver Sonic T-14 High Resolution speaker cable was designed by D.H. LABS to provide the highest quality sound at a much lower price than competing cables. It uses the finest materials available, including silver, oxygen-free copper and a pure Teflon dielectric.

The cable is completely manufactured in the U.S.A. The process begins with strands of high purity OFC copper, which are individually coated with a thick layer of silver. The strands are then tightly wound and extruded with our Teflon insulation. Silver Sonic T-14 uses DuPont PTFE, which is the highest grade of Teflon (and the most expensive). The cable has a very low capacitance of 21.5 pico-farads per foot. The inductance is also very low, which allows consistent performance with a wide variety of speakers. In fact, a ten foot length of T-14 cable has less inductance than the output stages of many amplifiers! Vibration damping spacers and a tensioned wrap under the jacket hold the conductors tightly in place, and the cable is completely free from resonances and microphonic effects that cause a loss of resolution. From the deepest bass to the highest treble, T-14 provides the most transparent sound possible, with precise imaging and a large, deep sound stage. 

$6.00 per linear foot

DH Labs BL-1 Interconnect cable

SILVER SONIC BL-1 Series II Interconnect is a high performance audio interconnect cable that combines the highest sound quality and reliability available at its price point. In the tradition of our highly acclaimed SILVER SONIC T-14 High Resolution Speaker Cable, SILVER SONIC BL-1 is made in USA and uses the finest materials available, including high purity silver, Teflon and oxygen-free copper.

SILVER SONIC BL-1 is a balanced cable designed for use with both RCA and XLR connectors. It is 100% shielded, and can operate in close proximity to digital equipment without noise pick up. The conductors consist of slow drawn oxygen free copper, which are coated with pure silver, the silver coating thickness being chosen to provide optimum synergy with the OFC base metal. The conductors are insulated with a special Teflon copolymer dielectric.

Silver Sonic BL-1 uses large 20 gauge conductors for low signal loss. Every spool is tested, and our Teflon insulators are made to the highest standards in the industry.

$4.00 per linear foot

DH Labs D-75 75ohm Digital cable

The D-75 is a thoroughly engineered, precision 75 ohm coaxial digital cable designed for accurate handling of digital audio signals. The most common use for this cable is to connect the digital output of a CD or DVD transport to an outboard Digital to Analog converter or other digital processor. Several features of this cable make it superior for digital audio use.

A solid, silver-coated center conductor is used to maintain the most uniform impedance. The use of a solid center conductor minimizes signal reflections, which are very important in digital data cables. This center conductor is encased in a very uniform closed cell foam Teflon dielectric, which has an extremely low dielectric constant of under 1.4. This provides the lowest dielectric absorption and loss, along with the most uniform attenuation vs frequency curve.

Noise rejection is maximized by a 2 Layer shield. This dual shield provides 100% coverage for complete immunity to noise. The combination of a 100% aluminum Mylar shield and a heavy braid keeps ground resistance as low as possible. The braid is wound with carefully controlled tension in order to minimize a phenomenon called "VSWR spikes" (a common cause of signal reflections in high frequency cables).

The result of these efforts is a cable that can provide excellent performance to beyond 2 Gigahertz. The D-75 is available in bulk, or carefully terminated with our coaxial RCA connector, for minimum reflection and optimum signal transfer.

$4.50 per linear foot

DH Labs D-110 110ohm AES Digital cable

The Silver Sonic D-110 is a precision 110 Ohm AES/EBU type balanced digital interface cable. 110 Ohm digital cables are most often used to carry digital audio data from A/D converters to digital tape transports in recording studios. They are also used between CD transports and D/A converters in home hi-fi systems as an alternative to the more common S/PDIF 75 Ohm coaxial interface. 110 Ohm cables are terminated with XLR connectors.

The Silver Sonic D-110 was designed to be a state-of-the-art, no compromise product. We feel it’s sonic performance equals or exceeds all other cables of this type, regardless of price. This level of performance is achieved by combining the finest materials available with the highest level of quality control.

A critical goal for any digital interface cable is to maintain a uniform characteristic impedance. This is achieved in the D-110 through the use of a pure Teflon insulation whose thickness is held to a tolerance of .002 inch (.05 mm). The material is extruded under pressure in order to maintain maximum consistency, which minimizes a phenomenon called "VSWR spikes", a cause of jitter.

Other features of the D-110 include silver coated conductors for improved conductivity, solid rod spacers to maintain a constant impedance, and 100% shield coverage to eliminate noise and interference.

If your audio system has the ability to utilize the 110 Ohm digital interface, we recommend auditioning the D-110 before investing large sums of money in other cables. Several recording and mastering studios have already selected the D-110 as their cable of choice.

$4.50 per linear foot

Cardas Crosslink Speaker cable

It is a Multi-gauge, Golden Section, and Constant Q conductors using 4 x 11.5awg stranded OFC conductors. The four conductors and cotton stranding are then wrapped in Teflon Tape. It has a flame retardant EEA and cotton for the dielectric, with pvc jacket, making it CL 2 rated. This means it makes an excellent in wall cable for home theater set ups. It is the only cable by Cardas you can buy in bulk. It is an internal Biwire Cable. Double up the conductors for standard configuration.
 

$8.40 per linear foot

Cardas Crosslink Interconnect cable

 It is very flexible and light weight. Golden Ratio, Constant Q, Crossfield, Pure Copper Litz conductors are used. 2 x 20.5 gauge conductors wrapped in Teflon® and cotton create the dielectric, with double shielding and a neoprene jacket. Crosslink is great for automotive installations and small home audio systems. Can be used in Single Ended and Balanced Configuration.
 

$6.80 per linear foot