DIY Connectors

	FP-601M (R) THE BEST High End Performance Male XLR Connectors Rhodium-Plated Features � Beryllium copper and phosphor bronze α (Alpha) Conductor � Brass body and PVDF Teflon insulation � Connections: Soldered Rating � Specified for cable diameters up to 12mm � Dimensions: 19.5mm � 0.1 diameter x 48.5mm � 0.1mm overall length$45.00/Box Set $132.00 / Pair
	FP-602F (R) THE BEST High End Performance Female XLR Connectors Rhodium-Plated Features � Beryllium copper and phosphor bronze α (Alpha) Conductor � Brass body and PVDF Teflon insulation � Connections: Soldered Rating � Specified for cable diameters up to 12mm � Dimensions: 19.5mm � 0.1 diameter x 54.2mm � 0.1mm overall length $158.00 / Pair
	FP-202(R) THE BEST High Performance Audio Banana Connectors Rhodium-Plated (Locking Type) 4 pcs/set Features � Eutectic cast brass α (Alpha) pins � Connections: Set-screw Rating � Specified for cable diameters up to 7mm � Dimensions: Space between Conductor: 8.2mm o 12mm diameter x 26.7mm � 0.1mm (H) x 46mm overall length $77 / Set of 4
	FP-704(G) THE BEST High Performance Phone Plug FP-704(G) 24k Gold-Plated (Stereo) �Eutectic cast brass α (Alpha) center pin �Brass rear housing with PBT and fiberglass insulation �Specified for cable diameters up to 8mm �Connections: Soldered �Zn-Mg Alloy Casting body housing Dimensions: �Housing---17.8� 0.1mm diameter X65.8mm� 0.1mm,97.8mm� 0.1mm overall length $13.20

Eichmann Connectors

Eichmann Copper Bullets

The Bullet Plug� connector solves the problems of standard and audiophile grade RCA plugs by providing a faster, cleaner signal of high purity and detail.

To achieve this Eichmann ha designed the Bullet Plug� as a miniature cable - with high-conductive, gold-plated tellurium copper (CuTe) pins providing a rapid transfer of electrons to/from RCA sockets.

In Their patent-pending design, the return pin of the Bullet Plug� makes single point contact with the side wall of an RCA socket - concentrating electrons to one point thereby reducing distortion. This is a similar approach to �star earthing� used in amplifiers.

$56.00/Box Set

Eichmann Silver Bullets

The contact pins are machined from hard drawn 4-nines pure silver rod, and then treated with Caig Preservit 5PL - which leaves a microscopic protective coating to prevent oxidation and enhance conductivity.

Sound quality is in the highest league, with subtle but significant improvements over the standard tellurium copper plug.

Ideal for silver interconnects and any high performance cable. 2 year warranty

$138.00/Box Set

The cables you now use are made from high-conductive, annealed copper or silver wires - terminated with low-conductive, gold-plated brass RCA plugs.

Annealed copper has a conductivity rating of at least 100% IACS (International Annealed Copper Standard). Brass has a conductivity rating of 28% IACS.

Because of this low conductivity, we believe brass RCA plugs act as a bottleneck to electron flow. Brass plugs may also cause phase errors and smearing through mass and skin effect.

Another problem is the return/ground collar - which can impair electron flow through:

� Eddy current distortion - as electrons proceed to and from the RCA socket into the collar through multiple contact points.

� Capacitive distortion - where gaps exist between the socket and collar.

� Micro-arcing distortion - an electrical short that can occur where gaps exist between the socket and collar.

Additionally, RCA plugs are coaxial designs (metal return/ground surrounding signal pin) that have an impedance effect. This impedance can have a varied and adverse impact on performance.

The Bullet plug are the solution.

Switchcraft Connectors

$15.00	SWITCHCRAFT 35HDRABAU 3.5mm RIGHT ANGLED STEREO PLUG BLACK w/GOLD PLUG These heavy duty 3.5 mm stereo plugs feature machined brass construction and oversized solder terminals. Available with black chrome plated barrel. The cable clamp is heavy duty to provide superior strain relief while the knurled handle provides a sure grip. Connector type: 3.5 mm stereo plug. Handle: Black chrome. Plug: Gold.
$10.00	SWITCHCRAFT 35HDBAU 3.5mm STEREO PLUG BLACK w/GOLD PLUG These heavy duty 3.5 mm stereo plugs feature machined brass construction and oversized solder terminals. Available with black chrome plated barrel. The cable clamp is heavy duty to provide superior strain relief while the knurled handle provides a sure grip. Connector type: 3.5 mm stereo plug. Handle: Black chrome. Plug: Gold.
$14.00	SWITCHCRAFT TA3FB Mini XLR plug. This is the connector for use with AKG Pro Series Headphones

Sennheiser Cardas Connectors

$30.00

Sennheiser Cardas DIY Headphone Connectors

Sennheiser molded Connectors for DIY Headphone cables. Rhodium Plated pins that will accept up to about 20awg wire. Maybe a little bigger with solid core wire. Fill the reservoir up with Hot Glue and put heatshrink over. Ask about our Headphone Cable Heatshrink Pack for $15. All the Heatshrink needed to create your own Sennheiser Headphone cable.

$15.00	NEUTRIK NC3FX-HD XLR FEMALE w/GOLD CONTACTS Neutrik's X-HD Series has become the accepted worldwide as the best XLR cable connectors. The female features an insert that's completely surrounded by Stainless steel metal for added protection and the shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is quick and easy with no screws to worry about and includes the unique Neutrik chuck type strain relief. Connector type: XLR female. Shell: chrome. Contacts: Gold. .
$15.00	NEUTRIK NC3MX-HD XLR MALE w/GOLD CONTACTS Neutrik's X-HD Series has become the accepted worldwide as the best XLR cable connectors. The male features an insert that's completely surrounded by Stainless steel metal for added protection . Assembly is quick and easy with no screws to worry about and includes the unique Neutrik chuck type strain relief. Connector type: XLR female. Shell: chrome. Contacts: Gold.
$5.00	NEUTRIK NC3FX-B XLR FEMALE BLACK w/SILVER CONTACTS Neutrik's X Series has become the accepted worldwide standard for XLR cable connectors. The compact design offers the shortest XLR cable version in the industry. The female features an insert that's completely surrounded by metal for added protection and the shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is quick and easy with no screws to worry about and includes the unique Neutrik chuck type strain relief. Connector type: XLR female. Shell: Black. Contacts: Gold.
$5.00	NEUTRIK NC3MX-B XLR MALE BLACK w/SILVER CONTACTS Neutrik's X Series has become the accepted worldwide standard for XLR cable connectors. The compact design offers the shortest XLR cable version in the industry. Assembly is quick and easy with no screws to worry about and includes the unique Neutrik chuck type strain relief. Connector type: XLR male. Shell: Black chrome. Contacts: Gold.
$10.00	NEUTRIK NC3FRC-B RIGHT ANGLED XLR FEMALE BLACK w/SILVER CONTACTS Neutrik's X Series has become the accepted worldwide standard for XLR cable connectors. The compact design offers the shortest XLR cable version in the industry. The female features an insert that's completely surrounded by metal for added protection and the shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is quick and easy with no screws to worry about and includes the unique Neutrik chuck type strain relief. Connector type: XLR female. Shell: Black. Contacts: Gold.
$10.00	NEUTRIK NC3MRC-B RIGHT ANGLED XLR MALE BLACK w/SILVER CONTACTS Neutrik's X Series has become the accepted worldwide standard for XLR cable connectors. The compact design offers the shortest XLR cable version in the industry. Assembly is quick and easy with no screws to worry about and includes the unique Neutrik chuck type strain relief. Connector type: Right Angled XLR male. Shell: Black chrome. Contacts: Gold.
$5.00	NEUTRIK NP2C-BAG 1/4" MONO PLUG BLACK These 1/4" professional phone plugs are available in mono (2 contacts/TS) or stereo (3 contacts/TRS). Features include a diecast metal shell and unique Neutrik chuck type strain relief. Shell: Black chrome. Contacts: Silver.
$5.00	NEUTRIK NP3C-BAG 1/4" STEREO PLUG BLACK These 1/4" professional phone plugs are available in mono (2 contacts/TS) or stereo (3 contacts/TRS). Features include a diecast metal shell and unique Neutrik chuck type strain relief. Shell: Black chrome. Contacts: Silver.
$2.50	NEUTRIK NYS231B 3.5mm STEREO PLUG BLACK w/GOLD PLUG These 3.5 mm stereo plugs feature machined brass construction and oversized solder terminals. Available with either a nickel or black chrome plated barrel. The cable clamp is heavy duty to provide superior strain relief while the knurled handle provides a sure grip. Connector type: 3.5 mm stereo plug. Handle: Black chrome. Plug: Gold.
$6.00	NEUTRIK NTP3RC-B 3.5mm RIGHT ANGLED STEREO PLUG BLACK w/GOLD PLUG These 3.5 mm stereo plugs feature machined brass construction and oversized solder terminals. Available with either a nickel or black chrome plated barrel. The cable clamp is heavy duty to provide superior strain relief while the knurled handle provides a sure grip. Connector type: 3.5 mm stereo plug. Handle: Black chrome. Plug: Gold.
$6.00	NEUTRIK NBNC75PQS11 & NBNC75PLS9 Push-Pull BNC Cable Connector Unique push-pull locking system is ideal for ultra high-density applications, patching, etc. Assembly is fast and easy a requires only a standard center contact crimp (.063"/1.60 mm) after cable prep Use of a standard crimp size eliminates the need for different crimp dies and facilitates field repair Innovative screw lock cable retention with the jacket providing superior pull strength For use with cable types: Belden 1694A, Commscope 5765, ELF Inc. Cable, Eupen 705 CRT 5V-HS, Gepco VSD2001, Nokia/Draka 1.0/4.8 AF, Suhner S05133-07, Suhner S05163-02, DH Labs D-75
$3.50	NEUTRIK NYS322G 5PIN DIN Male 5pin din with gold plated pins and flexible strain relief. For use with Naim equipment, for DC power supply umbilical chords
$8.00	NEUTRIK NJ3FC6-BAG FEMALE LOCKING 1/4" CABLE MOUNT JACK Connector type: 1/4" female. Shell: Black chrome. Contacts: Gold.
$6.50	NEUTRIK NJ3FP6C-B 1/4" PANEL MOUNT LOCKING FEMALE BLACK Connector type: 1/4" female. Shell: Black chrome. Contacts: Gold.
$4.00	NEUTRIK NC3FD-L-1-B XLR "D" SERIES PANEL MOUNT FEMALE BLACK In this series, the male and female fit in the same hole cut-out and are front or rear mountable. The "D-L-1" Series features a one-piece unit with solder cup terminations. It is RF protected via a 3-point coaxial ground contact shell of the mated connector. This series is very cost effective. Connector type: XLR female. Shell: Black chrome. Contacts: Gold.
$4.00	NEUTRIK NC3MD-L-1-B XLR "D" SERIES PANEL MOUNT MALE BLACK In this series, the male and female fit in the same hole cut-out and are front or rear mountable. The "D-L-1" Series features a one-piece unit with solder cup terminations. It is RF protected via a 3-point coaxial ground contact shell of the mated connector. This series is very cost effective. Connector type: XLR male. Shell: Black chrome. Contacts: Gold.

House Interconnect Connectors

$12.00/Pair	Moon Audio's House locking connector: Good for cables up to 8mm, gold plated, split center pin, Center pin is a screw connection, screw can be removed for solder connection, ground connection must be soldered to grounding rails. Screw strain relief, may need small insert for small cables (I can provide)
$15.00/Pair	Moon Audio's heavy Duty House locking connector: Good for cables up to 10mm, gold plated, split center pin, Center pin is a solder connection, ground connection must be soldered to grounding rails. Screw strain relief.
$12.00/Pair male or female	Moon Audio's House XLR connector: Almost identical to the Neutrik NC3FX & NC3MX, only Gold casing, Same design philosophy.

$10.00/pair

Moon Audio's Rhodium over Silver Plated banana,

Copper Base, was designed to match the sound signature of the Cardas GRS spades.

Power Connections

Wattgate

$75.50 Each	Wattgate 330i 15a Audio Grade Male Connector The Wattgate 330 has been designed for fast, simple installation and worry-free performance. The construction of the 330 is built to last and features an elegant polycarbonate rear housing available in either black or clear with a durable nylon-tough front housing. The 330 has been designed to be adaptable to a wide range of power cables the removable insert can accommodate cable diameters from 0.300" (7.62 mm) to 0.655" (16.63 mm). Installation has been further simplified due to color coded, tightly-spaced, funnel shaped holes to guide the conductors into the unique Perma-Lock terminals. The Perma-Lock terminals work in the following way: As the terminal screw tightens down on the contact tang, it compresses the wire underneath the tang, causing the screw to exert an upwards lift of the collar overleaf. This lifting action "locks up" the threads screws. Stress relieving of the terminals is virtually eliminated. Heat cycling and vibration cannot loosen the screw. The real secret behind the 330 lies with the contact elements themselves. Super thick contact tangs are used along with a three-layer plating process: Oxygen free copper plating, electroless nickel, and finally 24k gold plating dramatically improves conductivity and prevents corrosion. 15 amp @ 120VAC.
$75.50 Each	Wattgate 330i Ag 15a Audio Grade Power Connector The Wattgate 330 has been designed for fast, simple installation and worry-free performance. The construction of the 330 is built to last and features an elegant polycarbonate rear housing available in clear blue with a durable nylon-tough front housing. The 330 has been designed to be adaptable to a wide range of power cables the removable insert can accommodate cable diameters from 0.300" (7.62 mm) to 0.655" (16.63 mm). Installation has been further simplified due to color coded, tightly-spaced, funnel shaped holes to guide the conductors into the unique Perma-Lock terminals. The Perma-Lock terminals work in the following way: As the terminal screw tightens down on the contact tang, it compresses the wire underneath the tang, causing the screw to exert an upwards lift of the collar overleaf. This lifting action "locks up" the threads screws. Stress relieving of the terminals is virtually eliminated. Heat cycling and vibration cannot loosen the screw. The real secret behind the 330 lies with the contact elements themselves. Super thick contact tangs are used along with a three-layer plating process: Oxygen free copper plating, electroless nickel, and finally Solver plating dramatically improves conductivity and prevents corrosion.
$75.50 Each	Wattgate 350i 15a Audio Grade Female IEC The construction of the 350i is durable, featuring an elegant polycarbonate rear housing available in either black or clear with a durable hi-temperature rated front housing. Additionally, there is a dust seal to protect the wiring chamber. The 350i has been designed to be adaptable to a wide range of power cables. It has a powerful mechanical cord clamp with a removable insert to accommodate cable diameters from 0.300" (7.62mm) to 0.655" (16.63mm). Installation has been further simplified due to clearly marked, tightly-spaced, funnel shaped holes to guide the conductors into the unique Perma-Lock terminals. The Perma-Lock terminals work in the following way: As the terminal screw tightens down on the contact tang, it compresses the wire underneath the tang, causing the screw to exert an upwards lift of the collar overleaf. This lifting action "locks up" the threads on the screw. Stress-relieving of the terminals is virtually eliminated. Heat cycling and vibration cannot loosen the screw. The real departure the 350 takes from the traditional IEC lies with the contact elements themselves. Our contacts are large and designed to possess a high spring rate to securely grip the connector on the component. In addition, we add our three-layer plating process: 1. Oxygen Free Copper plating- improves conductivity 2. Electroless Nickel plating- necessary to prevent the leeching of the copper through the gold layer. 3. 24k Gold plating- improves conductivity and prevents corrosion.
$75.50 Each	Wattgate 350i Ag 15a Silver Audio Grade Female IEC The construction of the 350i is durable, featuring an elegant polycarbonate rear housing in blue with a durable hi-temperature rated front housing. Additionally, there is a dust seal to protect the wiring chamber. The 350i has been designed to be adaptable to a wide range of power cables. It has a powerful mechanical cord clamp with a removable insert to accommodate cable diameters from 0.300" (7.62mm) to 0.655" (16.63mm). Installation has been further simplified due to clearly marked, tightly-spaced, funnel shaped holes to guide the conductors into the unique Perma-Lock terminals. The Perma-Lock terminals work in the following way: As the terminal screw tightens down on the contact tang, it compresses the wire underneath the tang, causing the screw to exert an upwards lift of the collar overleaf. This lifting action "locks up" the threads on the screw. Stress-relieving of the terminals is virtually eliminated. Heat cycling and vibration cannot loosen the screw. The real departure the 350 takes from the traditional IEC lies with the contact elements themselves. Our contacts are large and designed to possess a high spring rate to securely grip the connector on the component. In addition, we add our three-layer plating process: 1. Oxygen Free Copper plating- improves conductivity 2. Electroless Nickel plating- necessary to prevent the leeching of the copper through the gold layer. 3. Silver plating- improves conductivity and prevents corrosion.
$90.00 Each	Wattgate 350i HC 20a Female IEC The Wattgate three-layer plating process: 1. Oxygen Free Copper plating - improves conductivity. 2. Electroless Nickel plating-necessary to prevent the leeching of the copper through the gold layer. 3. 24k Gold plating - improves conductivity and prevents corrosion. Perma - Lock Terminals Large, high spring rate contacts Glass filled, high temperature nylon faceplate Polycarbonate rear housing Stainless hardware 20A/125VAC - 250VAC Some classifications 16A/250VA
$90.00 Each	Wattgate 350iAG HC 20a Female IEC The Wattgate three-layer plating process: 1. Oxygen Free Copper plating - improves conductivity. 2. Electroless Nickel plating-necessary to prevent the leeching of the copper through the gold layer. 3. Silver plating - improves conductivity and prevents corrosion Perma - Lock Terminals Large, high spring rate contacts Glass filled, high temperature nylon faceplate Polycarbonate rear housing Stainless hardware 20A/125VAC - 250VAC Some classifications 16A/250VA
$30.50 Each	Wattgate 320i HC 20a Female IEC Perma - Lock Terminals Large, high spring rate contacts Glass filled, high temperature nylon faceplate Polycarbonate rear housing Stainless hardware 20A/125VAC - 250VAC Some classifications 16A/250VA
$15.00 Each	Wattgate 5266i 15A/125V 3-PRONG PLUG BLACK The construction of the 5266i features an elegant polycarbonate rear housing in theater black with a durable hi-temperature rated front housing. Improvements were made to the Perma-Lock terminations. The faceplate set screws are of stainless steel. Additionally, there is a dust seal to protect the wiring chamber. The 5266i has been designed to be adaptable to a wide range of power cables. It has a powerful mechanical cord clamp with a removable insert to accommodate cable diameters from 0.300" (7.62mm) to 0.655" (16.63mm). Installation has been further simplified due to clearly marked, tightly-spaced, funnel shaped holes to guide the conductors into the unique Perma-Lock terminals. The Perma-Lock terminals work in the following way: As the terminal screw tightens down on the contact tang, it compresses the wire underneath the tang, causing the screw to exert an upwards lift of the collar overleaf. This lifting action "locks up" the threads on the screw. Stress-relieving of the terminals is virtually eliminated. Heat cycling and vibration cannot loosen the screw. The real departure the 5266i takes from the traditional IEC lies with the contact elements themselves. Our contacts are large and designed to possess a high grip rate to securely grip the outlet. Theater Black 15a@125VAC
$19.50 Each	Wattgate WG-320-BLK IEC CONNECTOR BLACK The new improved construction of the 320i features an elegant polycarbonate rear housing in theater black with a durable hi-temperature rated front housing. Improvements were made to the Perma-Lock terminations. The faceplate set screws are now of stainless steel. Additionally, there is a dust seal to protect the wiring chamber. The 320i has been designed to be adaptable to a wide range of power cables. It has a powerful mechanical cord clamp with a removable insert to accommodate cable diameters from 0.300" (7.62mm) to 0.655" (16.63mm). Installation has been further simplified due to clearly marked, tightly-spaced, funnel shaped holes to guide the conductors into the unique Perma-Lock terminals. The Perma-Lock terminals work in the following way: As the terminal screw tightens down on the contact tang, it compresses the wire underneath the tang, causing the screw to exert an upwards lift of the collar overleaf. This lifting action "locks up" the threads on the screw. Stress-relieving of the terminals is virtually eliminated. Heat cycling and vibration cannot loosen the screw. The real departure the 320i takes from the traditional IEC lies with the contact elements themselves. Our contacts are large and designed to possess a high spring rate to securely grip the connector on the component. Theater Black 15a@125VAC

Hubbell

$10.00 Each

HUBBELL H320C 20 Amp IEC CONNECTOR BLACK

The H320C IEC connector is perfect for the replacement or building your own 20Amp power cords. Heavy-duty vinyl connector body is available in black. IEC Detachable Straight blade connector.

Rating: 20 amp @ 250 vac - for use with Cord Dia.: .275"-.475" (8-12)
Description: IEC Detachable straight blade connector.
Type: 2-pole + earth.
Housing Material: Nylon-Black
Cord Clamp Material: Nylon
Terminal Screw Material: #8-32 Steel (copper or nickel finish)
Ground Screw Material: #8-32 Steel, (green finish)
Wire Clamps Material: 0.062" (1.6) Steel - Ni Plated
Power Contacts Material: .032" (.81) Brass

Non-Locking Version: $10.00 Each

Locking Version: $11.50 Each

HUBBELL H320B 20/16A 250V AC IEC straight blade.

The H320B IEC chassis connector is a perfect replacement for the standard 15Amp IEC's on your high powered amp. This connector, in combination with the power cord H320C connector, provided the tightest connection possible with a detachable power cord. Heavy-duty vinyl connector body is available in black.

Amperage 20A/16A
Voltage 250V
Poles and Wires 2 Pole, 3 Wire Grounding
Wiring Method Back Wired
Description IEC Straight blade panel mount power inlet.
Type 2-pole + earth.
Rating 16A 250V AC for European service; 20A 250V AC for North American service.
Contact Blades Material .040" (1.0) Brass
Ground Contact Blade Material .040" (1.0) Brass
Terminal Screw Material #6-32 Steel plated
Ground Screw Material #6-32 Steel plated Multi-drive
Wire Clamps Material .062 (1.8) Steel-nickel finish

Furutech

Furutech's FI-11 series AC connectors all use Furutech's a (Alpha)-Pure copper Conductor followed by a 24k Gold platting. It is a non-magnetic connector with a Type: 2-pole+earth rating and 15A/125V AC for North America. They are of outstanding price/value perfomance. The will easily accept a 12awg conductor and is very easy to terminate. See more specific specs below. Also available are Schuko versions. See more specific details below.
$44.00 Each	Furutech FI-11M (G) Gold Plated High End Performance Power Connectors 24k Gold-Plated Rating: 15A 125V <PS>E JET:15PJET090 USL /CNL Listed:04CA26110 Type: 2-pole+earth Features: � α (Alpha)-Pure copper Conductor � Earth (Ground) Jumper System � Nylon/fiberglass front body � polycarbonate shell Specifications: � Specified for cable diameters of 6.6mm to 16mm (With a longer screw up to 20mm) � Dimensions: Body length 48.2mm x 38mm diameter x 74mm overall length � Rated: 15A/125V
$44.00 Each	Furutech FI-11 (G) Gold Plated High End Performance Power Connectors 24k Gold-Plated Rating: 15A 125V / 10A 250V < PS >E JET:15PJET086 USL /CNL Listed:04CA26110 Features: � Phosphor bronze α (Alpha) Conductor � Earth (Ground) Jumper System � Nylon/fiberglass front body, polycarbonate shell Specifications: � Specified for cable diameters of 6.6mm to 16mm (With a longer screw up to 20mm) � Dimensions: Body length 48.2mm x 38mm diameter x 74mm overall length � Rated: 15A/125V 10A/250V
$40.00 Each	Furutech FI-15E (R) Rhodium Plated High Performance Power Connectors Rhodium-Plated Specifications: 10A 250V / 15A 125V USL /CNL Listed(99NK91409) < PS >E JET (12-1197) Type: 2-pole+earth Features: � Pure copper α (Alpha) Conductor � Earth (Ground) Jumper System � Nylon and fiberglass housing � Specified for cable diameters of 6.6mm to 13mm � Dimensions: Body length 31mm x 33.5mm diameter x 72.5mm overall length � Rated: 15A/125V 10A/250V
$40.00 Each	Furutech FI-15ME (R) Rhodium Plated High Performance Power Connectors Rhodium-Plated Specifications: 15A 125V USL /CNL Listed(01NK95113) < PS >E JET (15PJET090) Type: 2-pole+earth Features: � α (Alpha)-Pure copper Conductor � Earth (Ground) Jumper System � Nylon and fiberglass housing � Specified for cable diameters of 6.6mm to 13mm � Dimensions: Body length 31mm x 33.5mm diameter x 72.5mm overall length � Rated: 15A/125V
$99.00 Each	Furutech FI-31 (G) Gold Plated High Performance 20A IEC Connector24k Gold-Plated Features �Phosphor bronze α (Alpha) Conductor �Earth (Ground) Jumper System. �Material: Nylon/fiberglass �Polycarbonate shell �Specified for cable diameters of 6.6mm to 20.0mm Specifications: �Dimensions: Body length 40.8mm x 39mm diameter x 74mm overall length �Rated: 20A/125V and 16A/250V
FI-50M & FI50 NEW! 2008 THE High End Performance AC Power Connector New Piezo Ceramic Series Connectors � A Furutech First! Specs: Type: 2-pole+earth Rating:15A 125V/10A 250V AC Features: � α (Alpha) Pure copper Rhodium plated Conductor � Earth (Ground) Jumper System (US Patent No.: 6,669,491 ) � Nylon/fiberglass body incorporating nano sized ceramic particles for absorption of vibration resonance. � Multi layered nonmagnetic stainless steel and carbon fiber housing and incorporating acetal copolymer. The best of damping and insulation materials for improvements in frequency extension and tonal quality.. � Specified for cable diameters from 6mm to 20mm � Dimensions: Body length 40.0mm x 40.5mm diameter x 76.2mm overall length (Male) � Dimensions: Body length 44mm x 40.5mm diameter x 80.3mm overall length (Female) � Metal cable clamp for improved grip and reduction of mechanically and electrically induced distortion. Piezo Ceramic Series Connectors � A Furutech First! Furutech�s Pure Transmission FI-50 Piezo Ceramic series connector bodies and housings feature several breakthrough construction techniques. A multilayer nonmagnetic stainless steel and carbon fiber shell incorporates a special damping and insulating acetal copolymer. Furutech settled on stainless and carbon fiber for the outer housing after extensive listening sessions with Japanese industry figures and audiophiles. The body of the connectors combines two �active� materials: Nano-sized ceramic particles and powdered carbon. (Only nano-sized ceramic particles effectively couples with carbon powder.) Nylon and fiberglass are incorporated as well forming an extremely effective, well damped, mechanically and electrically nonresonant connector body. That�s correct, they�re electrically damped as well. Piezoelectric effects are the key. Furutech�s breakthrough in design and materials is based on employing nano-sized polycrystalline ferroelectric ceramic particles exhibiting electro-generative properties; mechanical pressure creates an electrical charge forming a bridge between electrical and mechanical oscillation. Carbon powder exhibits thermal-conductive characteristics that interact with the charged ferro-ceramic particles converting their energy into heat that�s conducted away and released from the surface of the connector body! These carefully chosen and tested �active� materials mechanically and electrically damp the connector and receptacle as they �interconvert� thermal, mechanical, and electrical energy for the finest Furutech Pure Transmission signal imaginable.
$217.80 Each Rhodium Plated	$217.80 Each Rhodium Plated
$96.00 Each Rhodium Plated	Furutech FI-25M (R) Rhodium Plated High End Performance Power Connectors 24k Rhodium-Plated Rating: 15A 125V A.C. < PS >E JET:JET1343-43001-1001 USL /CNL Listed:04CA26110 Type: 2-pole+earth Features: � α (Alpha)-Pure copper Conductor � Earth (Ground) Jumper System � Nylon/fiberglass front body � polycarbonate shell Specifications: � Specified for cable diameters of 6.6mm to 18mm � Dimensions: Body length 48.2mm x 38mm diameter x 74mm overall length � Rated: 15A/125V
$96.00 Each Rhodium Plated	Furutech FI-25 (R) Rhodium Plated High End Performance Power Connectors Rhodium-Plated Rating: 10A 250V / 15A 125V PSE JET:JET1343-43004-1001 USL /CNL Listed:04CA26110 Type: 2-pole+earth Features: � Pure copper α (Alpha) Conductor and phosphor bronze parts � Earth (Ground) Jumper System � Nylon/fiberglass front body � polycarbonate shell Specifications: � Specified for cable diameters of 6.6mm to 18mm � Dimensions: Body length 48.2mm x 38mm diameter x 74mm overall length � Rated: 15A/125V 10A/250VV
$44.00 Each	Furutech FI-E11 (G) Gold Plated High Performance SCHUKO Connector 24k Gold-Plated Type:CEE7-VII Rating: KEMA-KEUR--- KEMA�Standard(Netherlands), Listed(2076430.01) (Type: 2-pole+earth Rating: 16A 250V A.C. ) Features: � Eutectic brass α (Alpha) Conductor � Materials: Front body Nylon/fiberglass � Shell polycarbonate Specifications: � Accommodates cable diameters from 6.6mm to 16.0mm (With a longer screw up to 20mm) � Dimensions: Body length 56.0mm x 39.0mm diameter x 88mm overall length � Rated: 16A/250V
$88.00 Each	Furutech FI-E35 (R) Rhodium Plated High End Performance SCHUKO Connector Rhodium Plated Earth (Ground) Jumper System Type:CEE7-VII Rating: KEMA-KEUR--- KEMA�Standard (Netherlands), Listed(2076430.01) (Type: 2-pole+earth Rating: 16A 250V A.C. ) Features: � Phosphor bronze α (Alpha) Conductor � Earth (Ground) Jumper System � Materials: Front body Nylon/fiberglass � Shell polycarbonate Specifications: � Accommodates cable diameters from 6.6mm to 18.0mm � Dimensions: Body length 56.0mm x 39.0mm diameter x 88mm overall length � Rated: 16A/250V
$88.00 Each	Furutech FI-UK1363 (G) Gold Plated High End Performance BS-1363 Connector 24k Gold-Plated 13A Fused Rating: � Eutectic brass α (Alpha) Conductor � Material: Fireproof ABS body/housing Specifications: � Specifications: Accommodates cable diameters of 6.0mm to 20.0mm � Dimensions: Body 48mm (W) x 50.2mm (L) x 55.8mm (H) � Rated: 13A Fused/250V
$64.00 Each	Furutech New 2007 FP-15A(G)-N1 with Deep Cryo Treatement High Performance 24k Gold-plated Duplex Receptacle 24k Gold-Plated New for 2007 Furutech has upgraded the FP-15A series of High Performance Duplex Receptacles to feature a more solid construction and the tightest connections available. Improved sound and improved value for money. 2007 is the year to upgrade to a Furutech receptacle. Specifications: Non-magnetic 24k Gold plated plated Phosphor Bronze conductor（t: 0.8 mm） Accommodates cable diameters from 10 AWG to 24 AWG. Dimensions: 104.2mm�33.5mm (L�W), 28.2mm thick. Materials: Main body－Nylon and Glass Fiber Cover－Polycarbonate White for FP-15A-N1(G)and Black for FP-15A-N1(Cu) Connections: Set-screw
$12.00 Each	Furutech AC-Inlet (R) High Performance IEC Inlet INLET(R) Rhodium Plated Certified UL Recognition Specifications: Dimension: 50.9mm (W) x 24.1mm (D) x 28.8 (H) Rating: 10A 250v / 15A 125v AC Uutectic (low Temperature) cast brass α (Alpha) Conductor Cover－PBT and Fiberglass housing Connections: Solder

ACME Audio Labs

$35.00 Each Silver Plated $45.00 Each Silver Plated & Cryoed	Acme 20 amp/125 volt duplex AC outlet Silver Plated Some competitors advertise their AC outlets as having high copper content metal contact parts. The actual content is listed as over 70%, and this is true. The formulation of brass with this high content is called Olin#688 brass. Acme outlets also utilize Olin #688 brass and then are silver plated.
$30.00 Each Silver Plated $40.00 Each Silver Plated & Cryoed	Acme 15 amp/125 volt duplex AC outlet Silver Plated Some competitors advertise their AC outlets as having high copper content metal contact parts. The actual content is listed as over 70%, and this is true. The formulation of brass with this high content is called Olin#688 brass. Acme outlets also utilize Olin #688 brass and then are silver plated.
$5.00 Each Silver Plated $8.00 Each Silver Plated & Cryoed	Acme Panel mount IEC receptacle-10/15 amp style Silver Plated
$3.00 Each Silver Plated $4.00 Each Silver Plated & Cryoed	Acme Panel mount Fuse receptacle-10/15 amp style Silver Plated

PS Audio

SEE PS Audio Page for more pictures.

$45 Each

Power Port

Features

15 coats polished nickel

Classic and Designer models

Hospital grade

15 or 20 amp ready

Improves images

Lowers noise

Easy to install

Benefits

Cleans the soundstage

Open, airy, top end

Improves midrange bloom

Will not degrade over time

Improved connectivity

Lowers apparent noise floor

AV Grade™

The Power Port™ is a custom built, hospital grade, isolated ground, 15 to 20 amp receptacle that can make a major improvement in your audio/video system's performance and insure a life-long level of excellence.

Easy to install in your wall, or add to your Power Plant. This is one component you need in your listening room.

15 coats of polished nickel over high-purity brass, with the "grip of Mickey Mantle" and polished nickel plated hardware, this a must have in your system.

Think about what your equipment is connected to now. Chances are pretty good it's a $1.95 cheap brass "contractor's special".

$195

Soloist In-Wall Power Conditioner

Features

In-wall HC Ultimate Outlet

Cleans and protects

Spike protection

Unrestricted dynamics

Easy to install

Safe, ETL certified

Benefits

Clean power at the wall

No power cables needed

Better sound

Better picture

Perfect foundation for AC power

Protects connected equipment

Clean power

The Soloist in-wall power conditioner is a High Current Ultimate Outlet and spike protector built into the wall. No longer do you need to have in and out power cables for the UO. The same performance can now be achieved with the power conditioner where it belongs, in the wall!